6412
📏 60 × 150 × 35 mm
Product Photo
INACustom & Special Bearings
INA ZARF60150-L-TV
Custom & Special Bearings · 60 × 150 × 17.5 mm
60Bore d (mm)
150Outer D (mm)
17.5Width B (mm)
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The INA ZARF60150-L-TV is a Custom & Special Bearings, with a bore diameter (d) of 60 mm, an outer diameter (D) of 150 mm and a width (B) of 17.5 mm. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | INA |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | d 60 mm × D 150 mm × B 17.5 mm |
| Catalogue Ref. | cN4Qaa3q2p |
| 1 | μm AxialRunout Screw supportBearingConfiguredAxialRunout based on inner ring rotation. |
| 42190 | N AxialPreload |
| 6) | Sealing assembly Series DRS OfMounting dimensions. Seal carrier: See below 'Component'. |
| B | 17.5 mm |
| B1 | 38.5 mm |
| B2 | 16 mm |
| C | 22.5 mm |
| C0a | 550000 N |
| C0r | 92000 N |
| C1 | 12.5 mm |
| Ca | 187000 N |
| Cr | 44500 N |
| D1 | 105 mm |
| D2 | 90 mm |
| D3 | 105 mm |
| Da max | 106 mm |
| DR | 90 x 110 x Series 12 According to DIN 3760 Standard rotary shaft seal Order separately. |
| H2 | 103 mm |
| H3 | 72 mm |
| J | 123 mm |
| Series 12 x M10 | Quantity x Fixing screw'sDimensions, According to DIN 912-Series 10.9 Standard Tightening torque of fixing screws must follow manufacturer's data. Screw not included in delivery. |
| Series MA | 250 Nm |
| Series MRL | 4.2 Nm |
| Series Mm | 54.5 kg x cm^2 |
| ZMA60/98. AM60 | Recommended INA Lock nut designation |
| caL | 5300 N/μm |
| ckL | 4300 Nm/mrad |
| d1 | 6 mm |
| da min | 88 mm |
| m | 5350 g |
| nSeries G Öl | 2700 r/min |
| nSeries G Fett | 950 r/min |
| r1 min | 0.6 mm |
| rmin | 0.3 mm |
NH412
📏 60 × 150 × 35 mm