WD-R518
📏 55 × 151.5 × 29 mm
Product Photo
INACustom & Special Bearings
INA ZARF55145-L-TV
Custom & Special Bearings · 55 × 145 × 17.5 mm
55Bore d (mm)
145Outer D (mm)
17.5Width B (mm)
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The INA ZARF55145-L-TV is a Custom & Special Bearings, with a bore diameter (d) of 55 mm, an outer diameter (D) of 145 mm and a width (B) of 17.5 mm. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | INA |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | d 55 mm × D 145 mm × B 17.5 mm |
| Catalogue Ref. | jLWjeO9b9w |
| 1 | μm AxialRunout Screw supportBearingConfiguredAxialRunout based on inner ring rotation. |
| 40772 | N AxialPreload |
| 6) | Sealing assembly Series DRS OfMounting dimensions. Seal carrier: See below 'Component'. |
| B | 17.5 mm |
| B1 | 38.5 mm |
| B2 | 14 mm |
| C | 22.5 mm |
| C0a | 500000 N |
| C0r | 98000 N |
| C1 | 12.5 mm |
| Ca | 177000 N |
| Cr | 44000 N |
| D1 | 100 mm |
| D2 | 80 mm |
| D3 | 98 mm |
| Da max | 101 mm |
| DR | 80 x 100 x Series 10 According to DIN 3760 Standard rotary shaft seal Order separately. |
| H2 | 103 mm |
| H3 | 72 mm |
| J | 118 mm |
| Series 12 x M10 | Quantity x Fixing screw'sDimensions, According to DIN 912-Series 10.9 Standard Tightening torque of fixing screws must follow manufacturer's data. Screw not included in delivery. |
| Series MA | 220 Nm |
| Series MRL | 4 Nm |
| Series Mm | 43 kg x cm^2 |
| ZMA55/98. AM55 | Recommended INA Lock nut designation |
| caL | 4900 N/μm |
| ckL | 3600 Nm/mrad |
| d1 | 6 mm |
| da min | 78 mm |
| m | 5000 g |
| nSeries G Öl | 2900 r/min |
| nSeries G Fett | 1000 r/min |
| r1 min | 0.6 mm |
| rmin | 0.3 mm |
ZNRF55145TNANDGE55 × 145 × 82 mmZARF55145ANDGE55 × 145 × 82 mmZARF55145-TVANDGE55 × 145 × 82 mmZARF55145-L-TVANDGE55 × 145 × 103 mmMG55C1-2TANDGE55 × 149 × 45 mmMG55C1-1TANDGE55 × 149.5 × 45 mmMG55A1-14ANDGE55 × 149.5 × 45 mmMG55A1-20ANDGE55 × 150 × 45 mmCH5515145-2RSANDGE55 × 151 × 45 mmMG55C1-3TANDGE55 × 151 × 45 mm