ZAXFM2575
📏 25 × 75 × 25 mm
Product Photo
INACustom & Special Bearings
INA ZARF2575-L-TV
Custom & Special Bearings · 25 × 75 × 10 mm
25Bore d (mm)
75Outer D (mm)
10Width B (mm)
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The INA ZARF2575-L-TV is a Custom & Special Bearings, with a bore diameter (d) of 25 mm, an outer diameter (D) of 75 mm and a width (B) of 10 mm. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | INA |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | d 25 mm × D 75 mm × B 10 mm |
| Catalogue Ref. | rZfqMs746U |
| 1 | μm AxialRunout Screw supportBearingConfiguredAxialRunout based on inner ring rotation. |
| 10470 | N AxialPreload |
| 6) | Sealing assembly Series DRS OfMounting dimensions. Seal carrier: See below 'Component'. |
| B | Series 10 mm |
| B1 | 25 mm |
| B2 | 11 mm |
| C | 18 mm |
| C0a | 86000 N |
| C0r | 36000 N |
| C1 | Series 10 mm |
| Ca | 35500 N |
| Cr | 22600 N |
| D1 | 47 mm |
| D2 | 36 mm |
| D3 | 45 mm |
| Da max | 48 mm |
| DR | 36 x 47 x 7 According to DIN 3760 Standard rotary shaft seal Order separately. |
| H2 | 65 mm |
| H3 | 48 mm |
| J | 58 mm |
| Series 8 x M6 | Quantity x Fixing screw'sDimensions, According to DIN 912-Series 10.9 Standard Tightening torque of fixing screws must follow manufacturer's data. Screw not included in delivery. |
| Series MA | 25 Nm |
| Series MRL | 0.55 Nm |
| Series Mm | 1.15 kg x cm^2 |
| ZMA25/45. AM25 | Recommended INA Lock nut designation |
| caL | 1900 N/μm |
| ckL | 350 Nm/mrad |
| d1 | 3.2 mm |
| da min | 34 mm |
| m | 840 g |
| nSeries G Öl | 6000 r/min |
| nSeries G Fett | 1900 r/min |
| r1 min | 0.6 mm |
| rmin | 0.3 mm |
BEAM 025075-2RZ/PE
📏 25 × 75 × 28 mm
BEAM 025075-2RZ
📏 25 × 75 × 28 mm
ZKLF2575-2RS-PE
📏 25 × 75 × 28 mm
BEAM 025075-2RS
📏 25 × 75 × 28 mm
ZKLF2575-2RS
📏 25 × 75 × 28 mm
ZKLF2575-2Z
📏 25 × 75 × 28 mm
BEAM 025075-2RS/PE
📏 25 × 75 × 28 mm
ZKLF2575-2RS-2AP
📏 25 × 75 × 56 mm
WD-R503
📏 25 × 76.2 × 17 mm