SAF 23044K 7-13/16
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN TAPN15K208S
Ball Bearing Units · Dimensions on request
12.2 Kg27 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN TAPN15K208S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 12.2 Kg27 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 12.2 Kg27 lb |
| Catalogue Ref. | 4eAAQ7emfV |
| Adapter Sleeve Axial Movement Max | 0.Series 8 mm0.03 in |
| Adapter Sleeve Axial Movement Min | 0.6 mm0.022 in |
| Bearing Number | 22215 |
| C - Dynamic Load (Basic) | 49900 lbSeries 222 kN |
| C0 - Static Load | 54100 lb240 kN |
| Dimension A | 80.0 mm3.15 in |
| Dimension B | 160.Series 8 mm6.Series 33 in |
| Dimension C | 98 mm3.86 in |
| Dimension D Max | 244.6 mm9.63 in |
| Dimension D Min | 200.2 mm7.88 in |
| Dimension F | 276.4 mmSeries 10.88 in |
| Dimension H | 29.2 mm1.15 in |
| Dimension J (Bolt Size) | 16 mm0.625 in |
| Dimension L | 78.2 mm3.08 in |
| Dimension S | 72.9 mm2.87 in |
| Dimension Series G | 68.60 mm2.700 in |
| Dimension Series M | 43.9 mm1.73 in |
| Eng Internal Radial Clearance - Max | 0.0047 |
| Eng Internal Radial Clearance - Min | 0.0037 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | TAPN15K208ST |
| Grease Lubrication - B/C/O Seal | 1300 rpm |
| Grease Lubrication - Series M/N Seal | 1600 rpm |
| Grease Lubrication - T Seal | 2400 rpm |
| Housing Construction | Two-Bolt Pillow Block |
| Int Radial Clearance Reduction Max | 0.051 mm0.0020 in |
| Int Radial Clearance Reduction Min | 0.038 mm0.0015 in |
| Locking Style | Tapered Adapter |
| Oil Lubrication - B/C/O Seal | 1300 rpm |
| Oil Lubrication - Series M/N Seal | 1600 rpm |
| Oil Lubrication - T Seal | 2900 rpm |
| Post Install Int Radial Clearance Min | 0.043 mm0.0017 in |
| Pre Install Clearance Max | 0.120 mm0.0047 in |
| Pre Install Clearance Min | 0.095 mm0.0037 in |
| Shaft Size | 2-1/2 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.089 mm0.0035 in |
| UPC Code | 0883450275019 |
| Y1 - Geometry Factor | 3.14 |
| Y2 - Geometry Factor | 4.67 |
| e - Geometry Factor | 0.22 |
QVVSN22V400S
📏 Dimensions on request
NAU4LKAFL209-26
📏 Dimensions on request
YA102RRB
📏 Dimensions on request
LSM35BXHG
📏 Dimensions on request
SUCAT204-12/F
📏 Dimensions on request
LSM140BRHF
📏 Dimensions on request
QMP15J070S
📏 Dimensions on request
SUCBF207/FVSL613
📏 Dimensions on request
CM-UKFX09D1;H2309X
📏 Dimensions on request
VJ-PDNB 206
📏 Dimensions on request
QVVPX22V400S
📏 Dimensions on request
FSNT 519-616 - 21316 - TSNG316
📏 Dimensions on request
UKFCX12D1;H2312X
📏 Dimensions on request