QMPL10J115S
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN TAPK22K315S
Ball Bearing Units · Dimensions on request
39.5 Kg87 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN TAPK22K315S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 39.5 Kg87 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 39.5 Kg87 lb |
| Catalogue Ref. | yJDPla266t |
| Adapter Sleeve Axial Movement Max | 1.067 mm0.042 in |
| Adapter Sleeve Axial Movement Min | 0.762 mm0.03 in |
| Bearing Number | 22222 |
| C - Dynamic Load (Basic) | 125000 lb555 kN |
| C0 - Static Load | 147000 lb653 kN |
| Dimension A | 146.1 mm5.75 in |
| Dimension B | 273.8 mm10.78 in |
| Dimension C | 145 mm5.71 in |
| Dimension D Max | 395.2 mm15.56 in |
| Dimension D Min | 354.1 mm13.94 in |
| Dimension E | 101.6 mm4.00 in |
| Dimension F | 469.9 mm18.500 in |
| Dimension G | 158.80 mm6.2500 in |
| Dimension H | 45.7 mm1.80 in |
| Dimension L | 138.2 mm5.44 in |
| Dimension M | 63 mm2.48 in |
| Dimension S | 104.9 mm4.13 in |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | TAPK22K315ST |
| Grease Lubrication - B/C/O Seal | 600 rpm |
| Grease Lubrication - M/N Seal | 900 rpm |
| Grease Lubrication - T Seal | 1200 rpm |
| Housing Construction | Four-Bolt Pillow Block |
| Int Radial Clearance Reduction Max | 0.071 mm0.0028 in |
| Int Radial Clearance Reduction Min | 0.051 mm0.0020 in |
| Locking Style | Tapered Adapter |
| Oil Lubrication - B/C/O Seal | 600 rpm |
| Oil Lubrication - M/N Seal | 900 rpm |
| Oil Lubrication - T Seal | 1700 rpm |
| Post Install Int Radial Clearance Min | 0.0Series 64 mm0.0025 in |
| Pre Install Clearance Max | 0.170 mm0.0067 in |
| Pre Install Clearance Min | 0.135 mm0.0053 in |
| Shaft Size | 3-15/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.102 mm0.0040 in |
| UPC Code | 0883450297165 |
| Y1 - Geometry Factor | 2.73 |
| Y2 - Geometry Factor | 4.06 |
| e - Geometry Factor | 0.25 |
QVPL19V090S
📏 Dimensions on request
RTU 15/16
📏 Dimensions on request
SR 120x12
📏 Dimensions on request
69790413296
📏 Dimensions on request
SAF 23040K 7-1/4
📏 Dimensions on request
LSE212BXHFHTPS
📏 Dimensions on request
SUCBTBY204-12/F
📏 Dimensions on request
LSM65BRHFKPS
📏 Dimensions on request
SNT 212 - 22212 - VR212
📏 Dimensions on request
SDAF 22538
📏 Dimensions on request
69790412202
📏 Dimensions on request
RAS 1 9/16
📏 Dimensions on request
LSE303BRHFRSS
📏 Dimensions on request