UELFL203
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN TAPH22K400S
Ball Bearing Units · Dimensions on request
39.5 Kg87 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN TAPH22K400S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 39.5 Kg87 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 39.5 Kg87 lb |
| Catalogue Ref. | BT3cNGdBeZ |
| Adapter Sleeve Axial Movement Max | 1.067 mm0.042 in |
| Adapter Sleeve Axial Movement Min | 0.762 mm0.03 in |
| Bearing Number | 22222 |
| C - Dynamic Load (Basic) | 125000 lb555 kN |
| C0 - Static Load | 147000 lb653 kN |
| Dimension A | 125.5 mm4.94 in |
| Dimension B | 238.3 mm9.38 in |
| Dimension C | 145 mm5.71 in |
| Dimension D Max | 368.3 mm14.50 in |
| Dimension D Min | 301.8 mm11.88 in |
| Dimension E | 69.9 mm2.75 in |
| Dimension F | 406.4 mm16.00 in |
| Dimension G | 120.70 mm4.7500 in |
| Dimension H | 45.0 mm1.77 in |
| Dimension J (Bolt Size) | 20 mm0.750 in |
| Dimension L | 123.4 mm4.86 in |
| Dimension M | 63 mm2.48 in |
| Dimension S | 104.9 mm4.13 in |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | TAPH22K400ST |
| Grease Lubrication - B/C/O Seal | 600 rpm |
| Grease Lubrication - M/N Seal | 900 rpm |
| Grease Lubrication - T Seal | 1200 rpm |
| Housing Construction | Four-Bolt Pillow Block |
| Int Radial Clearance Reduction Max | 0.071 mm0.0028 in |
| Int Radial Clearance Reduction Min | 0.051 mm0.0020 in |
| Locking Style | Tapered Adapter |
| Oil Lubrication - B/C/O Seal | 600 rpm |
| Oil Lubrication - M/N Seal | 900 rpm |
| Oil Lubrication - T Seal | 1700 rpm |
| Post Install Int Radial Clearance Min | 0.0Series 64 mm0.0025 in |
| Pre Install Clearance Max | 0.170 mm0.0067 in |
| Pre Install Clearance Min | 0.135 mm0.0053 in |
| Shaft Size | 4 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.102 mm0.0040 in |
| UPC Code | 0883450276306 |
| Y1 - Geometry Factor | 2.73 |
| Y2 - Geometry Factor | 4.06 |
| e - Geometry Factor | 0.25 |
QVVFY16V215S
📏 Dimensions on request
LSE307BRHFRSS
📏 Dimensions on request
SUCBT206-19/F
📏 Dimensions on request
QMMC20J100S
📏 Dimensions on request
SUCST208/FVSL613
📏 Dimensions on request
SNT 509 - 22209K - LO509
📏 Dimensions on request
1115KPPB3
📏 Dimensions on request
QAPF20A400S
📏 Dimensions on request
QVCW11V200S
📏 Dimensions on request
SNT 513-611 - 21311 - TA311
📏 Dimensions on request
HSE612BXHFKPS
📏 Dimensions on request
SUCAT206-18/F
📏 Dimensions on request
UCT207
📏 Dimensions on request