SUCSF210-32/F
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN TAPH15K207S
Ball Bearing Units · Dimensions on request
13.20 Kg29 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN TAPH15K207S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 13.20 Kg29 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 13.20 Kg29 lb |
| Catalogue Ref. | u0cJxydceu |
| Adapter Sleeve Axial Movement Max | 0.762 mm0.03 in |
| Adapter Sleeve Axial Movement Min | 0.559 mm0.022 in |
| Bearing Number | 22215 |
| C - Dynamic Load (Basic) | 49900 lb222 kN |
| C0 - Static Load | 54100 lb240 kN |
| Dimension A | 82.6 mm3.25 in |
| Dimension B | 162.1 mm6.38 in |
| Dimension C | 98 mm3.86 in |
| Dimension D Max | 246.1 mm9.69 in |
| Dimension D Min | 201.7 mm7.94 in |
| Dimension E | 47.8 mm1.88 in |
| Dimension F | 276.4 mm10.88 in |
| Dimension G | 79.50 mm3.130 in |
| Dimension H | 32.8 mm1.29 in |
| Dimension J (Bolt Size) | 12 mm0.500 in |
| Dimension L | 83.6 mm3.29 in |
| Dimension M | 43.9 mm1.73 in |
| Dimension S | 72.9 mm2.87 in |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | TAPH15K207ST |
| Grease Lubrication - B/C/O Seal | 1300 rpm |
| Grease Lubrication - M/N Seal | 1600 rpm |
| Grease Lubrication - T Seal | 2400 rpm |
| Housing Construction | Four-Bolt Pillow Block |
| Int Radial Clearance Reduction Max | 0.051 mm0.0020 in |
| Int Radial Clearance Reduction Min | 0.038 mm0.0015 in |
| Locking Style | Tapered Adapter |
| Oil Lubrication - B/C/O Seal | 1300 rpm |
| Oil Lubrication - M/N Seal | 1600 rpm |
| Oil Lubrication - T Seal | 2900 rpm |
| Post Install Int Radial Clearance Min | 0.043 mm0.0017 in |
| Pre Install Clearance Max | 0.119 mm0.0047 in |
| Pre Install Clearance Min | 0.094 mm0.0037 in |
| Shaft Size | 2-7/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.089 mm0.0035 in |
| UPC Code | 0883450276207 |
| Y1 - Geometry Factor | 3.14 |
| Y2 - Geometry Factor | 4.67 |
| e - Geometry Factor | 0.22 |
HSM260BXHFRSS
📏 Dimensions on request
RCJT 1 1/4
📏 Dimensions on request
SDAF 22220
📏 Dimensions on request
SD 3092S
📏 Dimensions on request
C-UKF213D1;H2313X
📏 Dimensions on request
UKF207D1;H2307X
📏 Dimensions on request
UCFL211-32
📏 Dimensions on request
QVVPL19V307S
📏 Dimensions on request
QVVFB20V085S
📏 Dimensions on request
LSE304BXHGKPS
📏 Dimensions on request
UCFL206
📏 Dimensions on request
TAFK20K307S
📏 Dimensions on request
RSA 1
📏 Dimensions on request