FSNT 522-619 - 23222 - LO222
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN TAPH11K200S
Ball Bearing Units · Dimensions on request
8.6 Kg19 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN TAPH11K200S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 8.6 Kg19 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 8.6 Kg19 lb |
| Catalogue Ref. | nRhJaA3W32 |
| Adapter Sleeve Axial Movement Max | 0.559 mm0.022 in |
| Adapter Sleeve Axial Movement Min | 0.457 mm0.018 in |
| Bearing Number | 22211 |
| C - Dynamic Load (Basic) | 31400 lb140 kN |
| C0 - Static Load | 31900 lb142 kN |
| Dimension A | 69.9 mm2.75 in |
| Dimension B | 134.9 mm5.31 in |
| Dimension C | 74.9 mm2.95 in |
| Dimension D Max | 217.4 mm8.56 in |
| Dimension D Min | 182.4 mm7.18 in |
| Dimension E | 39.9 mm1.57 in |
| Dimension F | 251.0 mm9.88 in |
| Dimension G | 68.60 mm2.700 in |
| Dimension H | 31.8 mm1.25 in |
| Dimension J (Bolt Size) | 16 mm0.625 in |
| Dimension L | 69.9 mm2.75 in |
| Dimension M | 35.6 mm1.4 in |
| Dimension S | 58.9 mm2.32 in |
| Engineering Group | Mounted Bearing |
| Float | 1.270 mm0.050 in |
| Full Timken Part Number | TAPH11K200ST |
| Grease Lubrication - B/C/O Seal | 1600 rpm |
| Grease Lubrication - M/N Seal | 2200 rpm |
| Grease Lubrication - T Seal | 3200 rpm |
| Housing Construction | Four-Bolt Pillow Block |
| Int Radial Clearance Reduction Max | 0.038 mm0.0015 in |
| Int Radial Clearance Reduction Min | 0.030 mm0.0012 in |
| Locking Style | Tapered Adapter |
| Oil Lubrication - B/C/O Seal | 1800 rpm |
| Oil Lubrication - M/N Seal | 2200 rpm |
| Oil Lubrication - T Seal | 3800 rpm |
| Post Install Int Radial Clearance Min | 0.038 mm0.0015 in |
| Pre Install Clearance Max | 0.094 mm0.0037 in |
| Pre Install Clearance Min | 0.076 mm0.0030 in |
| Shaft Size | 2 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.076 mm0.0030 in |
| UPC Code | 0883450276153 |
| Y1 - Geometry Factor | 2.95 |
| Y2 - Geometry Factor | 4.40 |
| e - Geometry Factor | 0.23 |
MSE512BRHFRSS
📏 Dimensions on request
QVVFX11V200S
📏 Dimensions on request
YCJT 3/4 SGT
📏 Dimensions on request
UELFC211-35
📏 Dimensions on request
GY1103KRRB3
📏 Dimensions on request
LSE611BRHF
📏 Dimensions on request
QVPK20V085S
📏 Dimensions on request
QAMC15A300S
📏 Dimensions on request
SD 256C
📏 Dimensions on request
SN 605 1
📏 Dimensions on request
E-P4B-TRB-100MM-ECO/ECO
📏 Dimensions on request
NAU4LKST209-27
📏 Dimensions on request