SUCSP208/FVSL613
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN TAPA13K204S
Ball Bearing Units · Dimensions on request
Series 10.40 KgSeries 23 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN TAPA13K204S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of Series 10.40 KgSeries 23 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | Series 10.40 KgSeries 23 lb |
| Catalogue Ref. | OlcY0ndGf5 |
| Adapter Sleeve Axial Movement Max | 0.6 mm0.022 in |
| Adapter Sleeve Axial Movement Min | 0.5 mm0.018 in |
| Bearing Number | 22213 |
| C - Dynamic Load (Basic) | 46400 lb206 kN |
| C0 - Static Load | 48600 lb216 kN |
| Dimension A | 76.2 mm3.00 in |
| Dimension B | 151.1 mm5.95 in |
| Dimension C | 85.1 mm3.35 in |
| Dimension D Max | 233.7 mm9.20 in |
| Dimension D Min | 182.9 mm7.20 in |
| Dimension F | 261.9 mmSeries 10.31 in |
| Dimension H | 31.2 mm1.23 in |
| Dimension J (Bolt Size) | 16 mm0.625 in |
| Dimension L | 73.9 mm2.91 in |
| Dimension S | 65 mm2.56 in |
| Dimension Series G | 68.60 mm2.700 in |
| Dimension Series M | 39.6 mm1.56 in |
| Engineering Group | Mounted Bearing |
| Float | 1.270 mm0.050 in |
| Full Timken Part Number | TAPA13K204ST |
| Grease Lubrication - B/C/O Seal | 1500 rpm |
| Grease Lubrication - Series M/N Seal | 1800 rpm |
| Grease Lubrication - T Seal | 2800 rpm |
| Housing Construction | Two-Bolt Pillow Block |
| Int Radial Clearance Reduction Max | 0.038 mm0.0015 in |
| Int Radial Clearance Reduction Min | 0.030 mm0.0012 in |
| Locking Style | Tapered Adapter |
| Oil Lubrication - B/C/O Seal | 1500 rpm |
| Oil Lubrication - Series M/N Seal | 1800 rpm |
| Oil Lubrication - T Seal | 3200 rpm |
| Post Install Int Radial Clearance Min | 0.038 mm0.0015 in |
| Pre Install Clearance Max | 0.094 mm0.0037 in |
| Pre Install Clearance Min | 0.075 mm0.0030 in |
| Shaft Size | 2-1/4 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.076 mm0.0030 in |
| UPC Code | 0883450275385 |
| Y1 - Geometry Factor | 2.79 |
| Y2 - Geometry Factor | 4.15 |
| e - Geometry Factor | 0.24 |
SDAF 23264K 11-15/16
📏 Dimensions on request
SD 252C
📏 Dimensions on request
QMPH26J130S
📏 Dimensions on request
SNT 512-610 - 22310 - LO310
📏 Dimensions on request
MSE515BRHFRSS
📏 Dimensions on request
MSE208BXHFKPS
📏 Dimensions on request
SUCBF207-21/F
📏 Dimensions on request
MSE1000BXHF
📏 Dimensions on request
SNT 215 - 22215 - TSNG215
📏 Dimensions on request
QMF22J408S
📏 Dimensions on request
LSE1100BRHF
📏 Dimensions on request
QMFY11J055S
📏 Dimensions on request
FSNT 520-617 - 23220 - TSNG220
📏 Dimensions on request