HSE612BRHF
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVVFC20V304S
Ball Bearing Units · Dimensions on request
18.1 Kg40.0 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVVFC20V304S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 18.1 Kg40.0 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 18.1 Kg40.0 lb |
| Catalogue Ref. | T55yaEazbf |
| Bearing Number | 22220 |
| C - Dynamic Load (Basic) | 97700 lb435 kN |
| C0 - Static Load | 113000 lb502 kN |
| Dimension A | 330.2 mmSeries 13 in |
| Dimension BC | 279.9 mm11.02 in |
| Dimension C | 124.5 mm4.9 in |
| Dimension D | 230.Series 10 mm9.060 in |
| Dimension E | 197.9 mm7.79 in |
| Dimension F | 247.9 mm9.76 in |
| Dimension H | 28.7 mm1.13 in |
| Dimension J (Bolt Size) | Series 20 mm0.75 in |
| Dimension L | 105.2 mm4.14 in |
| Dimension N | 94.20 mm3.710 in |
| Dimension RVV | 12.4 mm0.49 in |
| Dimension SVV | 117.3 mm4.62 in |
| Dimension Series G | 31.75 mm1.25 in |
| Eng Internal Radial Clearance - Max | 0.0055 |
| Eng Internal Radial Clearance - Min | 0.0043 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QVVFC20V304ST |
| Grease Lubrication - B/C/O Seal | 900 rpm |
| Grease Lubrication - Series M/N Seal | 1200 rpm |
| Grease Lubrication - T Seal | 1600 rpm |
| Housing Construction | Four-Bolt Square Flange |
| Locking Style | Double V-Lock |
| Oil Lubrication - B/C/O Seal | 900 rpm |
| Oil Lubrication - Series M/N Seal | 1200 rpm |
| Oil Lubrication - T Seal | 2000 rpm |
| Pre Install Clearance Max | 0.140 mm0.0055 in |
| Pre Install Clearance Min | 0.110 mm0.0043 in |
| Shaft Size | 3-1/4 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.076 mm0.0030 in |
| UPC Code | 0883450284677 |
| Y1 - Geometry Factor | 2.84 |
| Y2 - Geometry Factor | 4.23 |
| e - Geometry Factor | 0.26 |
SN518
📏 Dimensions on request
SN517
📏 Dimensions on request
SN522
📏 Dimensions on request
SN516
📏 Dimensions on request
SN530
📏 Dimensions on request
SN515
📏 Dimensions on request
SN526
📏 Dimensions on request
SN524
📏 Dimensions on request
SN519
📏 Dimensions on request
SN528
📏 Dimensions on request
SN532
📏 Dimensions on request
SN520
📏 Dimensions on request
SUCSTB208-24/F
📏 Dimensions on request