QMPX18J080S
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVSN19V307S
Ball Bearing Units · Dimensions on request
25.40 Kg56 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVSN19V307S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 25.40 Kg56 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 25.40 Kg56 lb |
| Catalogue Ref. | 2Ev2Sw675I |
| Bearing Number | 22219 |
| C - Dynamic Load (Basic) | 86600 lb385 kN |
| C0 - Static Load | 99000 lb441 kN |
| Dimension A | 112.0 mm4.41 in |
| Dimension B | 212 mm8.34 in |
| Dimension C | 124.0 mm4.88 in |
| Dimension D Max | 327.0 mm12.87 in |
| Dimension D Min | 290.0 mm11.42 in |
| Dimension F | 380.00 mm14.96 in |
| Dimension G | 86.00 mm3.390 in |
| Dimension H | 39.0 mm1.53 in |
| Dimension J (Bolt Size) | 24 mm0.875 in |
| Dimension L | 102.0 mm4.02 in |
| Dimension RV | 8.4 mm0.33 in |
| Dimension SV | 93.7 mm3.69 in |
| Eng Internal Radial Clearance - Max | 0.0055 |
| Eng Internal Radial Clearance - Min | 0.0043 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QVSN19V307ST |
| Grease Lubrication - B/C/O Seal | 950 rpm |
| Grease Lubrication - M/N Seal | 1300 rpm |
| Grease Lubrication - T Seal | 1800 rpm |
| Housing Construction | Two-Bolt Pillow Block |
| Locking Style | Single V-Lock |
| Oil Lubrication - B/C/O Seal | 1000 rpm |
| Oil Lubrication - M/N Seal | 1300 rpm |
| Oil Lubrication - T Seal | 2200 rpm |
| Pre Install Clearance Max | 0.140 mm0.0055 in |
| Pre Install Clearance Min | 0.110 mm0.0043 in |
| Shaft Size | 3-7/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.076 mm0.0030 in |
| UPC Code | 0883450230322 |
| Y1 - Geometry Factor | 2.88 |
| Y2 - Geometry Factor | 4.29 |
| e - Geometry Factor | 0.23 |
QVVMC13V055S
📏 Dimensions on request
UCT205-16
📏 Dimensions on request
QATU13A060S
📏 Dimensions on request
SAFL205
📏 Dimensions on request
SAFL207
📏 Dimensions on request
SAFL205-15
📏 Dimensions on request
SAFL201-8
📏 Dimensions on request
SAFL202-10
📏 Dimensions on request
HCFT215
📏 Dimensions on request
SAFL204-12
📏 Dimensions on request
SAFL206-18
📏 Dimensions on request
SAFL206
📏 Dimensions on request
HCFT215-47
📏 Dimensions on request