1008KLL
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVPR14V060S
Ball Bearing Units · Dimensions on request
9.10 Kg20 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVPR14V060S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 9.10 Kg20 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 9.10 Kg20 lb |
| Catalogue Ref. | J08jCz5W5v |
| Bearing Number | 22214 |
| C - Dynamic Load (Basic) | 47800 lb213 kN |
| C0 - Static Load | 52000 lb231 kN |
| Dimension A | 69.9 mm2.75 in |
| Dimension B | 147.3 mm5.8 in |
| Dimension C | 94 mm3.7 in |
| Dimension D Max | 222.3 mm8.75 in |
| Dimension D Min | 181.1 mm7.13 in |
| Dimension E | 47.8 mm1.88 in |
| Dimension F | 260.4 mm10.250 in |
| Dimension G | 82.60 mm3.2500 in |
| Dimension H | 24.9 mm0.98 in |
| Dimension J (Bolt Size) | 16 mm0.625 in |
| Dimension L | 93.2 mm3.67 in |
| Dimension RV | 5.1 mm0.20 in |
| Dimension SV | 81 mm3.19 in |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QVPR14V060ST |
| Grease Lubrication - B/C/O Seal | 1400 rpm |
| Grease Lubrication - M/N Seal | 1700 rpm |
| Grease Lubrication - T Seal | 2600 rpm |
| Housing Construction | Four-Bolt Pillow Block |
| Locking Style | Single V-Lock |
| Oil Lubrication - B/C/O Seal | 1400 rpm |
| Oil Lubrication - M/N Seal | 1700 rpm |
| Oil Lubrication - T Seal | 3050 rpm |
| Pre Install Clearance Max | 0.095 mm0.0037 in |
| Pre Install Clearance Min | 0.075 mm0.0030 in |
| Shaft Size | 60 mm |
| Shaft Size Type | Metric |
| Shaft Tolerance | 0.038 mm0.0015 in |
| UPC Code | 0883450296991 |
| Y1 - Geometry Factor | 2.90 |
| Y2 - Geometry Factor | 4.32 |
| e - Geometry Factor | 0.23 |
MSE615BRHF
📏 Dimensions on request
SUCPLFL207-20/F
📏 Dimensions on request
QAACW22A407S
📏 Dimensions on request
QVVFL22V311S
📏 Dimensions on request
TAFC22K315S
📏 Dimensions on request
TAK 1 1/2
📏 Dimensions on request
SUCAF209-27/FVSL613
📏 Dimensions on request
QVVMC13V204S
📏 Dimensions on request
QMPX13J065S
📏 Dimensions on request
SAS 17
📏 Dimensions on request
SAF 22640 7-1/8
📏 Dimensions on request
SR 140x16
📏 Dimensions on request
E-P4B-TRB-90MM-ECO/ECC
📏 Dimensions on request