RAK 2
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVPN26V408S
Ball Bearing Units · Dimensions on request
61.70 Kg136 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVPN26V408S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 61.70 Kg136 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 61.70 Kg136 lb |
| Catalogue Ref. | TRQYgycbdd |
| Bearing Number | 22226 |
| C - Dynamic Load (Basic) | 170000 lb757 kN |
| C0 - Static Load | 212000 lb945 kN |
| Dimension A | 150.1 mm5.91 in |
| Dimension B | 281.7 mm11.09 in |
| Dimension C | 174.5 mm6.87 in |
| Dimension D Max | 400.1 mm15.75 in |
| Dimension D Min | 367.3 mm14.46 in |
| Dimension F | 444.5 mm17.50 in |
| Dimension G | 128.00 mm5.040 in |
| Dimension H | 49.3 mm1.94 in |
| Dimension J (Bolt Size) | 24 mm1.000 in |
| Dimension L | 142.2 mm5.60 in |
| Dimension RV | 5.6 mm0.22 in |
| Dimension SV | 147.8 mm5.82 in |
| Eng Internal Radial Clearance - Max | 0.0067 |
| Eng Internal Radial Clearance - Min | 0.0053 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QVPN26V408ST |
| Grease Lubrication - B/C/O Seal | 400 rpm |
| Grease Lubrication - M/N Seal | 700 rpm |
| Grease Lubrication - T Seal | 1000 rpm |
| Housing Construction | Two-Bolt Pillow Block |
| Locking Style | Single V-Lock |
| Oil Lubrication - B/C/O Seal | 400 rpm |
| Oil Lubrication - M/N Seal | 700 rpm |
| Oil Lubrication - T Seal | 1500 rpm |
| Pre Install Clearance Max | 0.170 mm0.0067 in |
| Pre Install Clearance Min | 0.135 mm0.0053 in |
| Shaft Size | 4-1/2 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.127 mm0.0050 in |
| UPC Code | 0883450244565 |
| Y1 - Geometry Factor | 2.62 |
| Y2 - Geometry Factor | 3.90 |
| e - Geometry Factor | 0.26 |
QVFX14V065S
📏 Dimensions on request
LSE607BRHFATL
📏 Dimensions on request
FSNT 526 - 22226 - TSNG226
📏 Dimensions on request
MSM130BXHF
📏 Dimensions on request
FSNT 517 - 22217K - VR517
📏 Dimensions on request
HSM175BRHFHTPS
📏 Dimensions on request
QAAPF13A065S
📏 Dimensions on request
FSNT 513-611 - 22311K - TSNG611
📏 Dimensions on request
NAU4LKSF207-21
📏 Dimensions on request
GY1204KRRB SGT
📏 Dimensions on request
DVC20K307S
📏 Dimensions on request
YCJ5/8
📏 Dimensions on request
UCF201-8
📏 Dimensions on request