SN 230C
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVPL22V315S
Ball Bearing Units · Dimensions on request
26.8 Kg59.0 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVPL22V315S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 26.8 Kg59.0 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 26.8 Kg59.0 lb |
| Catalogue Ref. | I0SGUO3D2F |
| Bearing Number | 22222 |
| C - Dynamic Load (Basic) | 125000 lb555 kN |
| C0 - Static Load | 147000 lb653 kN |
| Dimension A | 108.0 mm4.25 in |
| Dimension B | Series 223 mm8.780 in |
| Dimension C | 139.7 mm5.5 in |
| Dimension D Max | 320.0 mm12.60 in |
| Dimension D Min | 255.0 mm10.04 in |
| Dimension F | 362.0 mm14.25 in |
| Dimension G | 102.60 mm4.040 in |
| Dimension H | 38.1 mm1.50 in |
| Dimension J (Bolt Size) | 24 mm1.000 in |
| Dimension L | 116.6 mm4.59 in |
| Dimension RV | 7.9 mm0.31 in |
| Dimension SV | 104.9 mm4.13 in |
| Eng Internal Radial Clearance - Max | 0.0067 |
| Eng Internal Radial Clearance - Min | 0.0053 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QVPL22V315ST |
| Grease Lubrication - B/C/O Seal | 600 rpm |
| Grease Lubrication - M/N Seal | 900 rpm |
| Grease Lubrication - T Seal | 1200 rpm |
| Housing Construction | Two-Bolt Pillow Block |
| Locking Style | Single V-Lock |
| Oil Lubrication - B/C/O Seal | 600 rpm |
| Oil Lubrication - M/N Seal | 900 rpm |
| Oil Lubrication - T Seal | 1700 rpm |
| Pre Install Clearance Max | 0.170 mm0.0067 in |
| Pre Install Clearance Min | 0.135 mm0.0053 in |
| Shaft Size | 3-15/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.076 mm0.0030 in |
| UPC Code | 0883450228190 |
| Y1 - Geometry Factor | 2.73 |
| Y2 - Geometry Factor | 4.06 |
| e - Geometry Factor | 0.25 |
QVVSN28V125S
📏 Dimensions on request
YCJT 50 SGT
📏 Dimensions on request
UC313
📏 Dimensions on request
QVVP12V055S
📏 Dimensions on request
SNT 519-616 - 22316 - LO316
📏 Dimensions on request
E-TU-TRB-55MM-ECC
📏 Dimensions on request
SNT 215 - 22215 - TA215
📏 Dimensions on request
SNT 519-616 - 22316 - TA316
📏 Dimensions on request
TU-6x24
📏 Dimensions on request
QVVTU19V080S
📏 Dimensions on request
SUCPLFL210/FVSL613
📏 Dimensions on request
UCFL209
📏 Dimensions on request
MSE211BRHFKPS
📏 Dimensions on request