LSM35BXHFKPS
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVPL16V070S
Ball Bearing Units · Dimensions on request
12.7 Kg28 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVPL16V070S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 12.7 Kg28 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 12.7 Kg28 lb |
| Catalogue Ref. | vRNKYn4m3y |
| Bearing Number | 22216 |
| C - Dynamic Load (Basic) | 57200 lb254 kN |
| C0 - Static Load | 62500 lb278 kN |
| Dimension A | 82.6 mm3.25 in |
| Dimension B | 167.4 mm6.59 in |
| Dimension C | 106.4 mm4.19 in |
| Dimension D Max | 213.4 mm8.40 in |
| Dimension D Min | 195.6 mm7.70 in |
| Dimension F | 265.2 mm10.44 in |
| Dimension G | 76.200 mm3.0000 in |
| Dimension H | 35.1 mm1.38 in |
| Dimension J (Bolt Size) | 20 mm0.750 in |
| Dimension L | 91.2 mm3.59 in |
| Dimension RV | 5.1 mm0.20 in |
| Dimension SV | 83.6 mm3.29 in |
| Eng Internal Radial Clearance - Max | 0.0047 |
| Eng Internal Radial Clearance - Min | 0.0037 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QVPL16V070ST |
| Grease Lubrication - B/C/O Seal | 1150 rpm |
| Grease Lubrication - M/N Seal | 1500 rpm |
| Grease Lubrication - T Seal | 2200 rpm |
| Housing Construction | Two-Bolt Pillow Block |
| Locking Style | Single V-Lock |
| Oil Lubrication - B/C/O Seal | 1200 rpm |
| Oil Lubrication - M/N Seal | 1500 rpm |
| Oil Lubrication - T Seal | 2650 rpm |
| Pre Install Clearance Max | 0.120 mm0.0047 in |
| Pre Install Clearance Min | 0.095 mm0.0037 in |
| Shaft Size | 70 mm |
| Shaft Size Type | Metric |
| Shaft Tolerance | 0.051 mm0.0020 in |
| UPC Code | 0883450228091 |
| Y1 - Geometry Factor | 3.14 |
| Y2 - Geometry Factor | 4.67 |
| e - Geometry Factor | 0.22 |
NAU4LKAT210-31
📏 Dimensions on request
QVFB20V304S
📏 Dimensions on request
E-P2B-TRB-3 1/2-ECO
📏 Dimensions on request
SAF 23024K 4-1/16
📏 Dimensions on request
TAS 2
📏 Dimensions on request
TCJT 7/8
📏 Dimensions on request
SR 130x10
📏 Dimensions on request
NAU4LKATBYM207-21
📏 Dimensions on request
MSE1000BXHFHTPS
📏 Dimensions on request
UCP206-18
📏 Dimensions on request
MSM110BRHF
📏 Dimensions on request
TTU-65-12
📏 Dimensions on request
E-4BF-TRB-3 7/16
📏 Dimensions on request