EUDR-40MM
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVPL12V203S
Ball Bearing Units · Dimensions on request
7.7 Kg17.0 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVPL12V203S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 7.7 Kg17.0 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 7.7 Kg17.0 lb |
| Catalogue Ref. | emBbLfa6aF |
| Bearing Number | 22212 |
| C - Dynamic Load (Basic) | 38100 lb169 kN |
| C0 - Static Load | 39000 lb174 kN |
| Dimension A | 63.5 mm2.50 in |
| Dimension B | 133.4 mm5.25 in |
| Dimension C | 80.3 mm3.16 in |
| Dimension D Max | 179.3 mm7.06 in |
| Dimension D Min | 165.1 mm6.50 in |
| Dimension F | 225.6 mm8.88 in |
| Dimension G | 65.50 mm2.580 in |
| Dimension H | 31.8 mm1.25 in |
| Dimension J (Bolt Size) | 16 mm0.625 in |
| Dimension L | 83.8 mm3.3 in |
| Dimension RV | 1.3 mm0.05 in |
| Dimension SV | 79.8 mm3.14 in |
| Eng Internal Radial Clearance - Max | 0.0037 |
| Eng Internal Radial Clearance - Min | 0.0030 |
| Engineering Group | Mounted Bearing |
| Float | 1.270 mm0.050 in |
| Full Timken Part Number | QVPL12V203ST |
| Grease Lubrication - B/C/O Seal | 1550 rpm |
| Grease Lubrication - M/N Seal | 2000 rpm |
| Grease Lubrication - T Seal | 3000 rpm |
| Housing Construction | Two-Bolt Pillow Block |
| Locking Style | Single V-Lock |
| Oil Lubrication - B/C/O Seal | 1650 rpm |
| Oil Lubrication - M/N Seal | 2000 rpm |
| Oil Lubrication - T Seal | 3500 rpm |
| Pre Install Clearance Max | 0.094 mm0.0037 in |
| Pre Install Clearance Min | 0.075 mm0.0030 in |
| Shaft Size | 2-3/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.038 mm0.0015 in |
| UPC Code | 0883450952774 |
| Y1 - Geometry Factor | 2.84 |
| Y2 - Geometry Factor | 4.23 |
| e - Geometry Factor | 0.24 |
SDAF 22617
📏 Dimensions on request
QVVC12V055S
📏 Dimensions on request
SNT 210 - 22210 - TSNG210
📏 Dimensions on request
YAE25RR
📏 Dimensions on request
SD 3096S
📏 Dimensions on request
UELFL210-32
📏 Dimensions on request
E-PF-TRB-115MM-ECC
📏 Dimensions on request
QVVMC26V407S
📏 Dimensions on request
LSE207BRHF
📏 Dimensions on request
E-PF-TRB-2 11/16
📏 Dimensions on request
UCT212-39
📏 Dimensions on request
QASN18A304S
📏 Dimensions on request
FSNT 522-619 - 21319K - LO619
📏 Dimensions on request