CM-UKFX20D1;H2320X
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVPL11V115S
Ball Bearing Units · Dimensions on request
6.4 Kg14 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVPL11V115S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 6.4 Kg14 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 6.4 Kg14 lb |
| Catalogue Ref. | sAnLVPdleF |
| Bearing Number | 22211 |
| C - Dynamic Load (Basic) | 31400 lb140 kN |
| C0 - Static Load | 31900 lb142 kN |
| Dimension A | 57.2 mm2.25 in |
| Dimension B | 122.2 mm4.81 in |
| Dimension C | 75.9 mm2.99 in |
| Dimension D Max | 161.5 mm6.36 in |
| Dimension D Min | 150.6 mm5.93 in |
| Dimension F | 212.9 mm8.38 in |
| Dimension G | 62.00 mm2.440 in |
| Dimension H | 31.8 mm1.25 in |
| Dimension J (Bolt Size) | 16 mm0.625 in |
| Dimension L | 82.0 mm3.23 in |
| Dimension RV | 1.5 mm0.06 in |
| Dimension SV | 79.8 mm3.14 in |
| Eng Internal Radial Clearance - Max | 0.0037 |
| Eng Internal Radial Clearance - Min | 0.0030 |
| Engineering Group | Mounted Bearing |
| Float | 1.270 mm0.050 in |
| Full Timken Part Number | QVPL11V115ST |
| Grease Lubrication - B/C/O Seal | 1600 rpm |
| Grease Lubrication - M/N Seal | 2200 rpm |
| Grease Lubrication - T Seal | 3200 rpm |
| Housing Construction | Two-Bolt Pillow Block |
| Locking Style | Single V-Lock |
| Oil Lubrication - B/C/O Seal | 1800 rpm |
| Oil Lubrication - M/N Seal | 2200 rpm |
| Oil Lubrication - T Seal | 3800 rpm |
| Pre Install Clearance Max | 0.094 mm0.0037 in |
| Pre Install Clearance Min | 0.075 mm0.0030 in |
| Shaft Size | 1-15/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.038 mm0.0015 in |
| UPC Code | 0883450137867 |
| Y1 - Geometry Factor | 2.95 |
| Y2 - Geometry Factor | 4.40 |
| e - Geometry Factor | 0.23 |
E-P4B-TRB-4 7/16
📏 Dimensions on request
LSM90BXHFATL
📏 Dimensions on request
SUCBFL205-15/FVSL613
📏 Dimensions on request
MSE112BXHFATL
📏 Dimensions on request
QVFL19V307S
📏 Dimensions on request
SNT 516-613 - 21313 - TSNG313
📏 Dimensions on request
QVFB17V300S
📏 Dimensions on request
QAPF15A215S
📏 Dimensions on request
LSE912BRHF
📏 Dimensions on request
RSA 60
📏 Dimensions on request
FSNT 519-616 - 22316K - VR616
📏 Dimensions on request
SAF 22616
📏 Dimensions on request
QVVFX16V212S
📏 Dimensions on request