SAF 22634 5-13/16
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVPKT15V060S
Ball Bearing Units · Dimensions on request
12.7 Kg28 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVPKT15V060S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 12.7 Kg28 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 12.7 Kg28 lb |
| Catalogue Ref. | QDXPDVe4fy |
| Bearing Number | 22215 |
| C - Dynamic Load (Basic) | 49900 lb222 kN |
| C0 - Static Load | 54100 lb240 kN |
| Dimension A | 88.9 mm3.50 in |
| Dimension B | 153.7 mm6.05 in |
| Dimension C | 94 mm3.7 in |
| Dimension D Max | 265.2 mm10.44 in |
| Dimension D Min | 230.1 mm9.06 in |
| Dimension F | 330.20 mm13.000 in |
| Dimension G | 75.70 mm2.980 in |
| Dimension H | 35.1 mm1.38 in |
| Dimension J (Bolt Size) | 24 mm0.875 in |
| Dimension L | 89.9 mm3.54 in |
| Dimension RV | 3.6 mm0.14 in |
| Dimension SV | 82.6 mm3.25 in |
| Eng Internal Radial Clearance - Max | 0.0037 |
| Eng Internal Radial Clearance - Min | 0.0030 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QVPKT15V060ST |
| Grease Lubrication - B/C/O Seal | 1300 rpm |
| Grease Lubrication - M/N Seal | 1600 rpm |
| Grease Lubrication - T Seal | 2400 rpm |
| Housing Construction | Two-Bolt Pillow Block |
| Locking Style | Single V-Lock |
| Oil Lubrication - B/C/O Seal | 1300 rpm |
| Oil Lubrication - M/N Seal | 1600 rpm |
| Oil Lubrication - T Seal | 2900 rpm |
| Pre Install Clearance Max | 0.094 mm0.0037 in |
| Pre Install Clearance Min | 0.075 mm0.0030 in |
| Shaft Size | 60 mm |
| Shaft Size Type | Metric |
| Shaft Tolerance | 0.038 mm0.0015 in |
| UPC Code | 0883450245517 |
| Y1 - Geometry Factor | 3.14 |
| Y2 - Geometry Factor | 4.67 |
| e - Geometry Factor | 0.22 |
SUCBFB208-24/F
📏 Dimensions on request
QVCW16V212S
📏 Dimensions on request
UC207
📏 Dimensions on request
HSM240BRHFATL
📏 Dimensions on request
VJ-PDPF 2220
📏 Dimensions on request
QVPK17V215S
📏 Dimensions on request
QVF22V312S
📏 Dimensions on request
ECP-U204-12
📏 Dimensions on request
EUDR-3 3/16
📏 Dimensions on request
QVVFB17V070S
📏 Dimensions on request
E-P2B-TRB-3 1/2-ECC
📏 Dimensions on request
SUCAP207-21/F
📏 Dimensions on request
FSNT 518-615 - 21315 - VR315
📏 Dimensions on request