QVVPK17V212S
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVPK20V303S
Ball Bearing Units · Dimensions on request
31.8 Kg70.0 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVPK20V303S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 31.8 Kg70.0 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 31.8 Kg70.0 lb |
| Catalogue Ref. | wiQHSn7n7h |
| Bearing Number | 22220 |
| C - Dynamic Load (Basic) | 97700 lb435 kN |
| C0 - Static Load | 113000 lb502 kN |
| Dimension A | 127.0 mm5.00 in |
| Dimension B | 239.8 mm9.44 in |
| Dimension C | 124.5 mm4.9 in |
| Dimension D Max | 355.6 mm14.00 in |
| Dimension D Min | 317.5 mm12.50 in |
| Dimension E | 88.9 mm3.50 in |
| Dimension F | 425.5 mm16.75 in |
| Dimension G | 139.700 mm5.5000 in |
| Dimension H | 41.4 mm1.63 in |
| Dimension L | 128.8 mm5.07 in |
| Dimension RV | 14.0 mm0.55 in |
| Dimension SV | 95.3 mm3.75 in |
| Eng Internal Radial Clearance - Max | 0.0055 |
| Eng Internal Radial Clearance - Min | 0.0043 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QVPK20V303ST |
| Grease Lubrication - B/C/O Seal | 900 rpm |
| Grease Lubrication - M/N Seal | 1200 rpm |
| Grease Lubrication - T Seal | 1600 rpm |
| Housing Construction | Four-Bolt Pillow Block |
| Locking Style | Single V-Lock |
| Oil Lubrication - B/C/O Seal | 900 rpm |
| Oil Lubrication - M/N Seal | 1200 rpm |
| Oil Lubrication - T Seal | 2000 rpm |
| Pre Install Clearance Max | 0.140 mm0.0055 in |
| Pre Install Clearance Min | 0.109 mm0.0043 in |
| Shaft Size | 3-3/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.076 mm0.0030 in |
| UPC Code | 0883450283762 |
| Y1 - Geometry Factor | 2.85 |
| Y2 - Geometry Factor | 4.24 |
| e - Geometry Factor | 0.24 |
RAO 1 15/16
📏 Dimensions on request
UC318
📏 Dimensions on request
UC208-25
📏 Dimensions on request
HSE615BRHFATL
📏 Dimensions on request
QVVPA26V407S
📏 Dimensions on request
EUC-J
📏 Dimensions on request
HSM260BRHFATL
📏 Dimensions on request
E-P4B-TRB-3 7/16-ECC
📏 Dimensions on request
VAK 3/4
📏 Dimensions on request
HSM240BXHF
📏 Dimensions on request
QVFC22V312S
📏 Dimensions on request
SUCAP207-22/FVSL613
📏 Dimensions on request
QVVFC22V315S
📏 Dimensions on request