FSAF 22317
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVPK17V211S
Ball Bearing Units · Dimensions on request
16.8 Kg37.0 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVPK17V211S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 16.8 Kg37.0 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 16.8 Kg37.0 lb |
| Catalogue Ref. | U3SPjV2l13 |
| Bearing Number | 22217 |
| C - Dynamic Load (Basic) | 66900 lb297 kN |
| C0 - Static Load | 71900 lb320 kN |
| Dimension A | 101.6 mm4.00 in |
| Dimension B | 201.2 mm7.92 in |
| Dimension C | 106.4 mm4.19 in |
| Dimension D Max | 309.6 mm12.19 in |
| Dimension D Min | 274.6 mm10.81 in |
| Dimension E | 76.2 mm3.00 in |
| Dimension F | 381.00 mm15.000 in |
| Dimension G | 120.70 mm4.7500 in |
| Dimension H | 38.1 mm1.50 in |
| Dimension L | 113.5 mm4.47 in |
| Dimension RV | 19.3 mm0.76 in |
| Dimension SV | 84.6 mm3.33 in |
| Eng Internal Radial Clearance - Max | 0.0047 |
| Eng Internal Radial Clearance - Min | 0.0037 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QVPK17V211ST |
| Grease Lubrication - B/C/O Seal | 1100 rpm |
| Grease Lubrication - M/N Seal | 1400 rpm |
| Grease Lubrication - T Seal | 2000 rpm |
| Housing Construction | Four-Bolt Pillow Block |
| Locking Style | Single V-Lock |
| Oil Lubrication - B/C/O Seal | 1100 rpm |
| Oil Lubrication - M/N Seal | 1400 rpm |
| Oil Lubrication - T Seal | 2400 rpm |
| Pre Install Clearance Max | 0.120 mm0.0047 in |
| Pre Install Clearance Min | 0.095 mm0.0037 in |
| Shaft Size | 2-11/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.051 mm0.0020 in |
| UPC Code | 0883450283748 |
| Y1 - Geometry Factor | 3.07 |
| Y2 - Geometry Factor | 4.57 |
| e - Geometry Factor | 0.22 |
TCJ2
📏 Dimensions on request
QASN15A070S
📏 Dimensions on request
QVC16V212S
📏 Dimensions on request
QVVCW16V070S
📏 Dimensions on request
LSM55BXHFKPS
📏 Dimensions on request
SNT 213 - 22213 - TA213
📏 Dimensions on request
MSM70BRHF
📏 Dimensions on request
1012KRRB
📏 Dimensions on request
TAPA17K300S
📏 Dimensions on request
QAAFL20A400S
📏 Dimensions on request
NAU4LKATBY207-20
📏 Dimensions on request
UCT214-44
📏 Dimensions on request
SR 320x18
📏 Dimensions on request