HSE500BRHFHTPS
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVPH13V055S
Ball Bearing Units · Dimensions on request
11.3 Kg25 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVPH13V055S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 11.3 Kg25 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 11.3 Kg25 lb |
| Catalogue Ref. | sGNqgp615C |
| Bearing Number | 22213 |
| C - Dynamic Load (Basic) | 4Series 6400 lb206 kN |
| C0 - Static Load | 48600 lb216 kN |
| Dimension A | 76.2 mm3.00 in |
| Dimension B | 151.1 mm5.95 in |
| Dimension C | 80.3 mm3.16 in |
| Dimension D Max | 217.4 mm8.56 in |
| Dimension D Min | 182.4 mm7.18 in |
| Dimension E | 50.8 mm2.00 in |
| Dimension F | 261.9 mm10.31 in |
| Dimension G | 82.60 mm3.2500 in |
| Dimension H | 31.2 mm1.23 in |
| Dimension J (Bolt Size) | 12 mm0.500 in |
| Dimension L | 92.5 mm3.Series 64 in |
| Dimension RV | 2.3 mm0.09 in |
| Dimension SV | 85.3 mm3.36 in |
| Eng Internal Radial Clearance - Max | 0.0037 |
| Eng Internal Radial Clearance - Min | 0.0030 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QVPH13V055ST |
| Grease Lubrication - B/C/O Seal | 1500 rpm |
| Grease Lubrication - M/N Seal | 1800 rpm |
| Grease Lubrication - T Seal | 2800 rpm |
| Housing Construction | Four-Bolt Pillow Block |
| Locking Style | Single V-Lock |
| Oil Lubrication - B/C/O Seal | 1500 rpm |
| Oil Lubrication - M/N Seal | 1800 rpm |
| Oil Lubrication - T Seal | 3200 rpm |
| Pre Install Clearance Max | 0.094 mm0.0037 in |
| Pre Install Clearance Min | 0.076 mm0.0030 in |
| Shaft Size | 55 mm |
| Shaft Size Type | Metric |
| Shaft Tolerance | 0.038 mm0.0015 in |
| UPC Code | 0883450283144 |
| Y1 - Geometry Factor | 2.79 |
| Y2 - Geometry Factor | 4.15 |
| e - Geometry Factor | 0.24 |
E-TU-TRB-70MM
📏 Dimensions on request
LSM100BXHFKPS
📏 Dimensions on request
NAU4LKPLP207-22
📏 Dimensions on request
UCT318
📏 Dimensions on request
QVVPN22V400S
📏 Dimensions on request
SUCPLP204-12/F
📏 Dimensions on request
MSE215BRHFHTPS
📏 Dimensions on request
SNT 208-307 - 22208 - TA208
📏 Dimensions on request
LSE611BXHF
📏 Dimensions on request
QAFY18A307S
📏 Dimensions on request
GYE30KRRB SGT
📏 Dimensions on request
SAK 1
📏 Dimensions on request
UC309-28
📏 Dimensions on request