FSNT 511-609 - 22309K - LO609
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVPG28V125S
Ball Bearing Units · Dimensions on request
61.70 Kg136 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVPG28V125S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 61.70 Kg136 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 61.70 Kg136 lb |
| Catalogue Ref. | IYj0qsdTfl |
| Bearing Number | 22228 |
| C - Dynamic Load (Basic) | 194000 lb863 kN |
| C0 - Static Load | 237000 lb1060 kN |
| Dimension A | 150.0 mm5.91 in |
| Dimension B | 288.5 mm11.36 in |
| Dimension C | 190.0 mm7.48 in |
| Dimension D Max | 447.8 mm17.63 in |
| Dimension D Min | 384.3 mm15.13 in |
| Dimension E | 80.0 mm3.15 in |
| Dimension F | 500.4 mm19.70 in |
| Dimension G | 128.00 mm5.040 in |
| Dimension H | 49.3 mm1.94 in |
| Dimension J (Bolt Size) | 24 mm1.000 in |
| Dimension L | 152.9 mm6.02 in |
| Dimension RV | 1.3 mm0.05 in |
| Dimension SV | 147.8 mm5.82 in |
| Eng Internal Radial Clearance - Max | 0.0079 |
| Eng Internal Radial Clearance - Min | 0.0063 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QVPG28V125ST |
| Grease Lubrication - B/C/O Seal | 350 rpm |
| Grease Lubrication - M/N Seal | 650 rpm |
| Grease Lubrication - T Seal | 900 rpm |
| Housing Construction | Four-Bolt Pillow Block |
| Locking Style | Single V-Lock |
| Oil Lubrication - B/C/O Seal | 350 rpm |
| Oil Lubrication - M/N Seal | 650 rpm |
| Oil Lubrication - T Seal | 1200 rpm |
| Pre Install Clearance Max | 0.201 mm0.0079 in |
| Pre Install Clearance Min | 0.160 mm0.0063 in |
| Shaft Size | 125 mm |
| Shaft Size Type | Metric |
| Shaft Tolerance | 0.127 mm0.0050 in |
| UPC Code | 0883450343091 |
| Y1 - Geometry Factor | 2.67 |
| Y2 - Geometry Factor | 3.98 |
| e - Geometry Factor | 0.25 |
SNT 517 - 21314 - VR314
📏 Dimensions on request
UKFCX18D1;H2318X
📏 Dimensions on request
QMMH15J212S
📏 Dimensions on request
LSE404BXHGKPS
📏 Dimensions on request
SYJ 50 KF
📏 Dimensions on request
QVVTU19V090S
📏 Dimensions on request
SUCPLFB207-20/FVSL613
📏 Dimensions on request
SUCPLP209-27/F
📏 Dimensions on request
E-P2B-TRB-3 7/16
📏 Dimensions on request
YCJ 7/8 SGT
📏 Dimensions on request
NAU4LKAT206
📏 Dimensions on request
TTU-85-30
📏 Dimensions on request
E-P4B-TRB-2 1/2-ECO/ECC
📏 Dimensions on request