E-PF-TRB-5-ECO
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVPG17V215S
Ball Bearing Units · Dimensions on request
16.8 Kg37.0 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVPG17V215S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 16.8 Kg37.0 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 16.8 Kg37.0 lb |
| Catalogue Ref. | 64ZIy2cvdC |
| Bearing Number | 22217 |
| C - Dynamic Load (Basic) | 66900 lb297 kN |
| C0 - Static Load | 71900 lb320 kN |
| Dimension A | 95.0 mm3.74 in |
| Dimension B | 182.9 mm7.20 in |
| Dimension C | 106.4 mm4.19 in |
| Dimension D Max | 287.3 mm11.31 in |
| Dimension D Min | 239.8 mm9.44 in |
| Dimension E | 52.3 mm2.06 in |
| Dimension F | 320.8 mm12.63 in |
| Dimension G | 92.20 mm3.630 in |
| Dimension H | 31.8 mm1.25 in |
| Dimension J (Bolt Size) | 20 mm0.750 in |
| Dimension L | 99.3 mm3.91 in |
| Dimension RV | 6.1 mm0.24 in |
| Dimension SV | 84.6 mm3.33 in |
| Eng Internal Radial Clearance - Max | 0.0047 |
| Eng Internal Radial Clearance - Min | 0.0037 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QVPG17V215ST |
| Grease Lubrication - B/C/O Seal | 1100 rpm |
| Grease Lubrication - M/N Seal | 1400 rpm |
| Grease Lubrication - T Seal | 2000 rpm |
| Housing Construction | Four-Bolt Pillow Block |
| Locking Style | Single V-Lock |
| Oil Lubrication - B/C/O Seal | 1100 rpm |
| Oil Lubrication - M/N Seal | 1400 rpm |
| Oil Lubrication - T Seal | 2400 rpm |
| Pre Install Clearance Max | 0.120 mm0.0047 in |
| Pre Install Clearance Min | 0.095 mm0.0037 in |
| Shaft Size | 2-15/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.051 mm0.0020 in |
| UPC Code | 0883450296878 |
| Y1 - Geometry Factor | 3.07 |
| Y2 - Geometry Factor | 4.57 |
| e - Geometry Factor | 0.22 |
SUCAP205-14/F
📏 Dimensions on request
UEL205-14
📏 Dimensions on request
SNT 512-610 - 22212K - TA512
📏 Dimensions on request
QAAFY15A070S
📏 Dimensions on request
SYJ 65 KF
📏 Dimensions on request
SDAF 23288K 16-1/2
📏 Dimensions on request
SUCSTB206-20/F
📏 Dimensions on request
SN 211C 2
📏 Dimensions on request
E-P2B-TRB-2 1/4
📏 Dimensions on request
E-P2B-TRB-3-ECO/ECC
📏 Dimensions on request
QAASN13A208S
📏 Dimensions on request
SNT 512-610 - 21310K - TA610/ 1-3/4
📏 Dimensions on request
UELT205-15
📏 Dimensions on request