SNT 507-606 - 22207K - TSNG507
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVP19V304S
Ball Bearing Units · Dimensions on request
20.40 Kg45 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVP19V304S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 20.40 Kg45 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 20.40 Kg45 lb |
| Catalogue Ref. | rk1tg96h5W |
| Bearing Number | 22219 |
| C - Dynamic Load (Basic) | 86600 lb385 kN |
| C0 - Static Load | 99000 lb441 kN |
| Dimension A | 95.3 mm3.75 in |
| Dimension B | 195.3 mm7.69 in |
| Dimension C | 124.5 mm4.9 in |
| Dimension D Max | 285.Series 8 mm11.25 in |
| Dimension D Min | Series 238.3 mm9.38 in |
| Dimension F | 342.9 mm13.50 in |
| Dimension H | 47.Series 8 mm1.88 in |
| Dimension J (Bolt Size) | 24 mm0.875 in |
| Dimension L | 102.1 mm4.02 in |
| Dimension RV | 5.Series 8 mm0.23 in |
| Dimension SV | 93.7 mm3.69 in |
| Dimension Series G | 86.60 mm3.410 in |
| Eng Internal Radial Clearance - Max | 0.0055 |
| Eng Internal Radial Clearance - Min | 0.0043 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QVP19V304ST |
| Grease Lubrication - B/C/O Seal | 950 rpm |
| Grease Lubrication - Series M/N Seal | 1300 rpm |
| Grease Lubrication - T Seal | 1800 rpm |
| Housing Construction | Two-Bolt Pillow Block |
| Locking Style | Single V-Lock |
| Oil Lubrication - B/C/O Seal | 1000 rpm |
| Oil Lubrication - Series M/N Seal | 1300 rpm |
| Oil Lubrication - T Seal | 2200 rpm |
| Pre Install Clearance Max | 0.140 mm0.0055 in |
| Pre Install Clearance Min | 0.110 mm0.0043 in |
| Shaft Size | 3-1/4 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.076 mm0.0030 in |
| UPC Code | 0883450227384 |
| Y1 - Geometry Factor | 2.88 |
| Y2 - Geometry Factor | 4.29 |
| e - Geometry Factor | 0.23 |
SD 652
📏 Dimensions on request
SUCAT208-25/FVSL613
📏 Dimensions on request
V250C155-0 2
📏 Dimensions on request
QVVSN26V408S
📏 Dimensions on request
YCJM2 11/16
📏 Dimensions on request
QAAPR15A211S
📏 Dimensions on request
SNT 513-611 - 21311 - TSNG311
📏 Dimensions on request
E-TTU-TRB-75MM-ECO/ECO
📏 Dimensions on request
E-PF-TRB-5
📏 Dimensions on request
YASM 2
📏 Dimensions on request
QVVFK11V115S
📏 Dimensions on request
SDAF 22624 4-1/16
📏 Dimensions on request
MSM85BRHFRSS
📏 Dimensions on request