SR 160x16.2
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVP14V207S
Ball Bearing Units · Dimensions on request
Series 10.00 Kg22.00 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVP14V207S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of Series 10.00 Kg22.00 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | Series 10.00 Kg22.00 lb |
| Catalogue Ref. | o8OZRdbDcx |
| Bearing Number | 22214 |
| C - Dynamic Load (Basic) | 47800 lb213 kN |
| C0 - Static Load | 52000 lbSeries 231 kN |
| Dimension A | 69.9 mm2.75 in |
| Dimension B | 147.3 mm5.Series 8 in |
| Dimension C | 94 mm3.7 in |
| Dimension D Max | 219.2 mmSeries 8.63 in |
| Dimension D Min | 174.Series 8 mm6.88 in |
| Dimension F | 260.4 mmSeries 10.250 in |
| Dimension H | 35.1 mm1.38 in |
| Dimension J (Bolt Size) | 16 mm0.625 in |
| Dimension L | 88.9 mm3.50 in |
| Dimension RV | 5.3 mm0.21 in |
| Dimension SV | 81 mm3.19 in |
| Dimension Series G | 73.70 mm2.900 in |
| Eng Internal Radial Clearance - Max | 0.0037 |
| Eng Internal Radial Clearance - Min | 0.0030 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QVP14V207STHT |
| Grease Lubrication - B/C/O Seal | 1400 rpm |
| Grease Lubrication - Series M/N Seal | 1700 rpm |
| Grease Lubrication - T Seal | 2600 rpm |
| Housing Construction | Two-Bolt Pillow Block |
| Locking Style | Single V-Lock |
| Oil Lubrication - B/C/O Seal | 1400 rpm |
| Oil Lubrication - Series M/N Seal | 1700 rpm |
| Oil Lubrication - T Seal | 3050 rpm |
| Pre Install Clearance Max | 0.094 mm0.0037 in |
| Pre Install Clearance Min | 0.075 mm0.0030 in |
| Shaft Size | 2-7/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.038 mm0.0015 in |
| UPC Code | 0883450960175 |
| Y1 - Geometry Factor | 2.90 |
| Y2 - Geometry Factor | 4.Series 32 |
| e - Geometry Factor | 0.23 |
UELT212
📏 Dimensions on request
SUCAP205-15/F
📏 Dimensions on request
UKT216 - H2316
📏 Dimensions on request
SUCPLF206-19/F
📏 Dimensions on request
NAU4LKST206
📏 Dimensions on request
SNT 511-609 - 22211K - LO511
📏 Dimensions on request
QAAPR15A070S
📏 Dimensions on request
SUCAP207-22/F
📏 Dimensions on request
QAFL15A070S
📏 Dimensions on request
E-P4B-TRB-4 1/2-ECO/ECC
📏 Dimensions on request
E-PF-TRB-3 15/16-ECC
📏 Dimensions on request
LSE112BXHFRSS
📏 Dimensions on request
E-4BF-TRB-35MM
📏 Dimensions on request