QVVF16V212S
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVMC13V204S
Ball Bearing Units · Dimensions on request
5.4 Kg12 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVMC13V204S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 5.4 Kg12 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 5.4 Kg12 lb |
| Catalogue Ref. | RmCkKa321V |
| Bearing Number | 22213 |
| C - Dynamic Load (Basic) | 4Series 6400 lb206 kN |
| C0 - Static Load | 48600 lb216 kN |
| Dimension A | 13.50 mm0.530 in |
| Dimension B | 23.0 mm0.906 in |
| Dimension C | 80.3 mm3.16 in |
| Dimension D | 4.8 mm0.188 in |
| Dimension F | 127 mm5.0000 in |
| Dimension G | 67.10 mm2.Series 640 in |
| Dimension L Exp | 87.9 mm3.46 in |
| Dimension L Fix | 85.9 mm3.38 in |
| Dimension RV | 0.5 mm0.02 in |
| Dimension SV | 85.3 mm3.36 in |
| Eng Internal Radial Clearance - Max | 0.0037 |
| Eng Internal Radial Clearance - Min | 0.0030 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QVMC13V204ST |
| Grease Lubrication - B/C/O Seal | 1500 rpm |
| Grease Lubrication - M/N Seal | 1800 rpm |
| Grease Lubrication - T Seal | 2800 rpm |
| Housing Construction | Cartridge |
| Locking Style | Single V-Lock |
| Oil Lubrication - B/C/O Seal | 1500 rpm |
| Oil Lubrication - M/N Seal | 1800 rpm |
| Oil Lubrication - T Seal | 3200 rpm |
| Pre Install Clearance Max | 0.094 mm0.0037 in |
| Pre Install Clearance Min | 0.075 mm0.0030 in |
| Shaft Size | 2-1/4 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.038 mm0.0015 in |
| UPC Code | 0883450284912 |
| Y1 - Geometry Factor | 2.79 |
| Y2 - Geometry Factor | 4.15 |
| e - Geometry Factor | 0.24 |
SAPFT206-19
📏 Dimensions on request
SAPFT207-22
📏 Dimensions on request
SAPFT207-23
📏 Dimensions on request
SAPFT206-20
📏 Dimensions on request
SAPFT207-21
📏 Dimensions on request
SAPFT207-20
📏 Dimensions on request
SAPFT207
📏 Dimensions on request
SAPFT206-18
📏 Dimensions on request
SR 160x14
📏 Dimensions on request
SNTD 3052 - 23052K - TA52
📏 Dimensions on request
LSM115BXHG
📏 Dimensions on request
NAU4LKPLF207-22
📏 Dimensions on request
RAS 1 7/16
📏 Dimensions on request