QVVPF19V080S
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVFY14V065S
Ball Bearing Units · Dimensions on request
8.6 Kg19 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVFY14V065S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 8.6 Kg19 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 8.6 Kg19 lb |
| Catalogue Ref. | Axi49feefK |
| Bearing Number | 22214 |
| C - Dynamic Load (Basic) | 47800 lb213 kN |
| C0 - Static Load | 52000 lb231 kN |
| Dimension BC | 171.5 mm6.75 in |
| Dimension C | 94.00 mm3.700 in |
| Dimension D | 146.1 mm5.75 in |
| Dimension E | 121.2 mm4.77 in |
| Dimension F | 206.5 mm8.13 in |
| Dimension H | 23.9 mm0.94 in |
| Dimension J (Bolt Size) | 16 mm0.625 in |
| Dimension L Exp | 86.9 mm3.42 in |
| Dimension L Fix | 84.8 mm3.34 in |
| Dimension N | 72.40 mm2.850 in |
| Dimension RV | 3.8 mm0.15 in |
| Dimension SV | 81 mm3.19 in |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QVFY14V065ST |
| Grease Lubrication - B/C/O Seal | 1400 rpm |
| Grease Lubrication - M/N Seal | 1700 rpm |
| Grease Lubrication - T Seal | 2600 rpm |
| Housing Construction | Round Flange |
| Locking Style | Single V-Lock |
| Oil Lubrication - B/C/O Seal | 1400 rpm |
| Oil Lubrication - M/N Seal | 1700 rpm |
| Oil Lubrication - T Seal | 3050 rpm |
| Pre Install Clearance Max | 0.094 mm0.0037 in |
| Pre Install Clearance Min | 0.075 mm0.0030 in |
| Shaft Size | 65 mm |
| Shaft Size Type | Metric |
| Shaft Tolerance | 0.038 mm0.0015 in |
| UPC Code | 0883450296373 |
| Y1 - Geometry Factor | 2.90 |
| Y2 - Geometry Factor | 4.32 |
| e - Geometry Factor | 0.23 |
SD 3140S
📏 Dimensions on request
1110KRRB
📏 Dimensions on request
YCJT 55 SGT
📏 Dimensions on request
QVMC22V100S
📏 Dimensions on request
QVCW12V055S
📏 Dimensions on request
SNTD 3064 - 23064K - TA64
📏 Dimensions on request
NAU4LKBP209-28
📏 Dimensions on request
SUCAP205/F
📏 Dimensions on request
FSAF 22218
📏 Dimensions on request
NAU4LKATBYM205-15
📏 Dimensions on request
FSNT 215 - 22215 - LO215
📏 Dimensions on request
SAS 2
📏 Dimensions on request