SNT 513-611 - 21311K - LO611
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVFX28V500S
Ball Bearing Units · Dimensions on request
52.2 Kg115 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVFX28V500S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 52.2 Kg115 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 52.2 Kg115 lb |
| Catalogue Ref. | CFVNev746V |
| Bearing Number | 22228 |
| C - Dynamic Load (Basic) | 194000 lb863 kN |
| C0 - Static Load | 237000 lb1060 kN |
| Dimension C | 284.20 mm11.190 in |
| Dimension E | 177.8 mm7.000 in |
| Dimension H | 38.1 mm1.50 in |
| Dimension J (Bolt Size) | 24 mm1.125 in |
| Dimension L Exp | 168.1 mm6.62 in |
| Dimension L Fix | 166.1 mm6.54 in |
| Dimension N | 138.40 mm5.450 in |
| Dimension RV | 18.3 mm0.72 in |
| Dimension SV | 147.8 mm5.82 in |
| Eng Internal Radial Clearance - Max | 0.0079 |
| Eng Internal Radial Clearance - Min | 0.0063 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QVFX28V500ST |
| Grease Lubrication - B/C/O Seal | 350 rpm |
| Grease Lubrication - M/N Seal | 650 rpm |
| Grease Lubrication - T Seal | 900 rpm |
| Housing Construction | Four-Bolt Square Flange |
| Locking Style | Single V-Lock |
| Oil Lubrication - B/C/O Seal | 350 rpm |
| Oil Lubrication - M/N Seal | 650 rpm |
| Oil Lubrication - T Seal | 1200 rpm |
| Pre Install Clearance Max | 0.201 mm0.0079 in |
| Pre Install Clearance Min | 0.160 mm0.0063 in |
| Shaft Size | 5 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.127 mm0.0050 in |
| UPC Code | 0883450339018 |
| Y1 - Geometry Factor | 2.62 |
| Y2 - Geometry Factor | 3.89 |
| e - Geometry Factor | 0.26 |
UKFC216 - H2316
📏 Dimensions on request
FSNT 526 - 23226K - TSNG526
📏 Dimensions on request
SUCAFB209/F
📏 Dimensions on request
E-TU-TRB-1 3/4-ECO
📏 Dimensions on request
QVVPN11V115S
📏 Dimensions on request
NAU4LKPLP209
📏 Dimensions on request
FSNT 511-609 - 21309 - LO309
📏 Dimensions on request
LSE112BRHFHTPS
📏 Dimensions on request
E-TU-TRB-50MM
📏 Dimensions on request
SUCBTBYM209-28/F
📏 Dimensions on request
UKF328D1;H2328
📏 Dimensions on request
V320C200-0 1
📏 Dimensions on request
E-4BF-TRB-4 7/16-ECO
📏 Dimensions on request