FSNT 532 - 22232 - VR232
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVFK22V315S
Ball Bearing Units · Dimensions on request
24.90 Kg55 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVFK22V315S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 24.90 Kg55 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 24.90 Kg55 lb |
| Catalogue Ref. | 8zkcsR5G5c |
| Bearing Number | 22222 |
| C - Dynamic Load (Basic) | 125000 lb555 kN |
| C0 - Static Load | 147000 lb653 kN |
| Dimension C | 256.50 mm10.100 in |
| Dimension E | 168.7 mm6.Series 64 in |
| Dimension H | 31.8 mm1.25 in |
| Dimension J (Bolt Size) | 24 mm1 in |
| Dimension L Exp | 119.4 mm4.7 in |
| Dimension L Fix | 117.3 mm4.62 in |
| Dimension N | 106.90 mm4.210 in |
| Dimension RV | 12.4 mm0.49 in |
| Dimension SV | 104.9 mm4.13 in |
| Eng Internal Radial Clearance - Max | 0.0067 |
| Eng Internal Radial Clearance - Min | 0.0053 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QVFK22V315ST |
| Grease Lubrication - B/C/O Seal | 600 rpm |
| Grease Lubrication - M/N Seal | 900 rpm |
| Grease Lubrication - T Seal | 1200 rpm |
| Housing Construction | Four-Bolt Square Flange |
| Locking Style | Single V-Lock |
| Oil Lubrication - B/C/O Seal | 600 rpm |
| Oil Lubrication - M/N Seal | 900 rpm |
| Oil Lubrication - T Seal | 1700 rpm |
| Pre Install Clearance Max | 0.140 mm0.0055 in |
| Pre Install Clearance Min | 0.109 mm0.0043 in |
| Shaft Size | 3-15/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.076 mm0.0030 in |
| UPC Code | 0883450342377 |
| Y1 - Geometry Factor | 2.55 |
| Y2 - Geometry Factor | 3.80 |
| e - Geometry Factor | 0.26 |
SUCST208-24/F
📏 Dimensions on request
QVVPX26V110S
📏 Dimensions on request
QVVMC26V115S
📏 Dimensions on request
SNT 513-611 - 21311K - LO611/ 2
📏 Dimensions on request
SR 340x10
📏 Dimensions on request
YASM 2 3/16
📏 Dimensions on request
SBLF207-22
📏 Dimensions on request
SALF201-8
📏 Dimensions on request
SALF202-10
📏 Dimensions on request
SBLF207-23
📏 Dimensions on request
SAF 23034K
📏 Dimensions on request
NAU4LKAFB208-25
📏 Dimensions on request
QVP12V204S
📏 Dimensions on request