SUCAP210/F
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVFC15V207S
Ball Bearing Units · Dimensions on request
11.3 Kg25 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVFC15V207S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 11.3 Kg25 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 11.3 Kg25 lb |
| Catalogue Ref. | NeCFx64038 |
| Bearing Number | 22215 |
| C - Dynamic Load (Basic) | 49900 lb222 kN |
| C0 - Static Load | 54100 lb240 kN |
| Dimension A | 255 mm10.04 in |
| Dimension BC | 215.1 mm8.47 in |
| Dimension C | 94 mm3.7 in |
| Dimension D | 169.90 mm6.690 in |
| Dimension E | 152.4 mm6.000 in |
| Dimension F | 192.00 mm7.56 in |
| Dimension G | 25.4 mm1 in |
| Dimension H | 23.9 mm0.94 in |
| Dimension J (Bolt Size) | 16 mm0.625 in |
| Dimension L | 87.1 mm3.43 in |
| Dimension N | Series 64.80 mm2.550 in |
| Dimension RV | 4.6 mm0.18 in |
| Dimension SV | 82.6 mm3.25 in |
| Eng Internal Radial Clearance - Max | 0.0037 |
| Eng Internal Radial Clearance - Min | 0.0030 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QVFC15V207ST |
| Grease Lubrication - B/C/O Seal | 1300 rpm |
| Grease Lubrication - M/N Seal | 1600 rpm |
| Grease Lubrication - T Seal | 2400 rpm |
| Housing Construction | Four-Bolt Square Flange |
| Locking Style | Single V-Lock |
| Oil Lubrication - B/C/O Seal | 1300 rpm |
| Oil Lubrication - M/N Seal | 1600 rpm |
| Oil Lubrication - T Seal | 2900 rpm |
| Pre Install Clearance Max | 0.094 mm0.0037 in |
| Pre Install Clearance Min | 0.075 mm0.0030 in |
| Shaft Size | 2-7/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.038 mm0.0015 in |
| UPC Code | 0883450296021 |
| Y1 - Geometry Factor | 2.74 |
| Y2 - Geometry Factor | 4.08 |
| e - Geometry Factor | 0.25 |
SNT 512-610 - 21310K - TSNG610
📏 Dimensions on request
SNTD 3156 - 22344K - LO56/200
📏 Dimensions on request
SAF 23036K
📏 Dimensions on request
SUCAFB209-27/FVSL613
📏 Dimensions on request
QACW13A065S
📏 Dimensions on request
QVVPL19V303S
📏 Dimensions on request
QAFL13A208S
📏 Dimensions on request
HSE612BXHFRSS
📏 Dimensions on request
1115KRS
📏 Dimensions on request
SNT 528 - 22228 - LO228
📏 Dimensions on request
TCJT 1 1/16
📏 Dimensions on request
UELP210
📏 Dimensions on request
SUCPLP210/F
📏 Dimensions on request