GYA014RRB
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVCW14V207S
Ball Bearing Units · Dimensions on request
7.30 Kg16 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVCW14V207S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 7.30 Kg16 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 7.30 Kg16 lb |
| Catalogue Ref. | 3LTnOSdteO |
| Bearing Number | 22214 |
| C - Dynamic Load (Basic) | 47800 lb213 kN |
| C0 - Static Load | 52000 lb231 kN |
| Dimension B Exp | 43.9 mm1.73 in |
| Dimension B Fix | 41.9 mm1.65 in |
| Dimension BC | 165.1 mm6.50 in |
| Dimension C | 94.00 mm3.700 in |
| Dimension E | 116.8 mm4.60 in |
| Dimension F | 193.8 mm7.63 in |
| Dimension G | 139.7 mm5.500 in |
| Dimension H | 12.7 mm0.50 in |
| Dimension J (Bolt Size) | 12 mm0.5 in |
| Dimension L | 86.4 mm3.40 in |
| Dimension N | 42.9 mm1.69 in |
| Dimension RV | 5.3 mm0.21 in |
| Dimension SV | 81 mm3.19 in |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QVCW14V207STM |
| Grease Lubrication - B/C/O Seal | 1400 rpm |
| Grease Lubrication - M/N Seal | 1700 rpm |
| Grease Lubrication - T Seal | 2600 rpm |
| Housing Construction | Piloted Flange Cartridge |
| Locking Style | Single V-Lock |
| Oil Lubrication - B/C/O Seal | 1400 rpm |
| Oil Lubrication - M/N Seal | 1700 rpm |
| Oil Lubrication - T Seal | 3050 rpm |
| Pre Install Clearance Max | 0.095 mm0.0037 in |
| Pre Install Clearance Min | 0.075 mm0.0030 in |
| Shaft Size | 2-7/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.038 mm0.0015 in |
| UPC Code | 0883450492508 |
| Y1 - Geometry Factor | 2.90 |
| Y2 - Geometry Factor | 4.32 |
| e - Geometry Factor | 0.23 |
FSAF 22518
📏 Dimensions on request
UC201
📏 Dimensions on request
QATU18A085S
📏 Dimensions on request
SN 309C 1
📏 Dimensions on request
PFT 1.5/16 WF
📏 Dimensions on request
QVVPKT13V204S
📏 Dimensions on request
LSE500BXHFATL
📏 Dimensions on request
FSNT 530 - 23230 - TSNG230
📏 Dimensions on request
FSNT 218 - 22218 - VR218
📏 Dimensions on request
RAK 1 5/8
📏 Dimensions on request
SDAF 23284
📏 Dimensions on request
VCJ 35
📏 Dimensions on request
LSM75BXHFRSS
📏 Dimensions on request