UCP206-20
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVC19V303S
Ball Bearing Units · Dimensions on request
14.5 Kg32 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVC19V303S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 14.5 Kg32 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 14.5 Kg32 lb |
| Catalogue Ref. | nvFCLV9y9Y |
| Bearing Number | 22219 |
| C - Dynamic Load (Basic) | 86600 lb385 kN |
| C0 - Static Load | 99000 lb441 kN |
| Dimension B Exp | Series 64.5 mm2.54 in |
| Dimension B Fix | 62.5 mm2.46 in |
| Dimension BC | 219.2 mm8.63 in |
| Dimension C | 124.50 mm4.900 in |
| Dimension E | 154.9 mm6.10 in |
| Dimension F | 262.6 mm10.34 in |
| Dimension G | 187.3 mm7.375 in |
| Dimension H | 25.4 mm1.00 in |
| Dimension J (Bolt Size) | 20 mm0.75 in |
| Dimension L | 95.8 mm3.77 in |
| Dimension N | 33.3 mm1.31 in |
| Dimension RV | 2.0 mm0.08 in |
| Dimension SV | 93.7 mm3.69 in |
| Eng Internal Radial Clearance - Max | 0.0055 |
| Eng Internal Radial Clearance - Min | 0.0043 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QVC19V303ST |
| Grease Lubrication - B/C/O Seal | 950 rpm |
| Grease Lubrication - M/N Seal | 1300 rpm |
| Grease Lubrication - T Seal | 1800 rpm |
| Housing Construction | Piloted Flange Cartridge |
| Locking Style | Single V-Lock |
| Oil Lubrication - B/C/O Seal | 1000 rpm |
| Oil Lubrication - M/N Seal | 1300 rpm |
| Oil Lubrication - T Seal | 2200 rpm |
| Pre Install Clearance Max | 0.140 mm0.0055 in |
| Pre Install Clearance Min | 0.110 mm0.0043 in |
| Shaft Size | 3-3/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.076 mm0.0030 in |
| UPC Code | 0883450295345 |
| Y1 - Geometry Factor | 2.88 |
| Y2 - Geometry Factor | 4.29 |
| e - Geometry Factor | 0.23 |
UCP206-18
📏 Dimensions on request
UCP204-12
📏 Dimensions on request
UCPE213
📏 Dimensions on request
UCP206-17
📏 Dimensions on request
UCPE215
📏 Dimensions on request
UCP205-15
📏 Dimensions on request
UCPE214
📏 Dimensions on request
UCP205-16
📏 Dimensions on request
UCP205-14
📏 Dimensions on request
UCPE212-39
📏 Dimensions on request
UCP202-10
📏 Dimensions on request
UCP207-20
📏 Dimensions on request
UCPE214-44
📏 Dimensions on request