NAU4LKAFL210
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QMTU15J212S
Ball Bearing Units · Dimensions on request
15.90 Kg35 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QMTU15J212S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 15.90 Kg35 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 15.90 Kg35 lb |
| Catalogue Ref. | vXHBSX8J8Y |
| Bearing Number | 22215 |
| C - Dynamic Load (Basic) | 49900 lb220 kN |
| C0 - Static Load | 54100 lb240 kN |
| Dimension A | 76.2 mm3.00 in |
| Dimension C | 25.4 mm1.00 in |
| Dimension D | 171.5 mm6.75 in |
| Dimension E | 150.9 mm5.94 in |
| Dimension F | 39.6 mm1.56 in |
| Dimension J | 108.0 mm4.25 in |
| Dimension K | 31.Series 8 mm1.25 in |
| Dimension L | 219.7 mmSeries 8.65 in |
| Dimension N | 97.0 mm3.82 in |
| Dimension P | 120.7 mm4.75 in |
| Dimension S | 46.00 mm1.810 in |
| Dimension Series G | 39.6 mm1.56 in |
| Dimension Series M | 60.2 mm2.37 in |
| Eng Internal Radial Clearance - Max | 0.0031 |
| Eng Internal Radial Clearance - Min | 0.0020 |
| Engineering Group | Mounted Bearing |
| Float | 2.03 mm0.08 in |
| Full Timken Part Number | QMTU15J212ST |
| Grease Lubrication - B/C/O Seal | 1300 rpm |
| Grease Lubrication - Series M/N Seal | 1600 rpm |
| Grease Lubrication - T Seal | 2400 rpm |
| Housing Construction | Take-Up |
| Locking Style | Eccentric |
| Oil Lubrication - B/C/O Seal | 1300 rpm |
| Oil Lubrication - Series M/N Seal | 1600 rpm |
| Oil Lubrication - T Seal | 2900 rpm |
| Pre Install Clearance Max | 0.080 mm0.0031 in |
| Pre Install Clearance Min | 0.050 mm0.0020 in |
| Shaft Size | 2-3/4 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.051 mm0.0020 in |
| UPC Code | 0883450260992 |
| Y1 - Geometry Factor | 3.14 |
| Y2 - Geometry Factor | 4.67 |
| e - Geometry Factor | 0.22 |
HCP213
📏 Dimensions on request
HCP212-39
📏 Dimensions on request
HCP215-48
📏 Dimensions on request
SAPE205-16
📏 Dimensions on request
SAPE205-15
📏 Dimensions on request
HCP211-35
📏 Dimensions on request
HCP215-47
📏 Dimensions on request
HCP215
📏 Dimensions on request
SAPE201-8
📏 Dimensions on request
SAPE206
📏 Dimensions on request
SAPE204
📏 Dimensions on request
HCP212-36
📏 Dimensions on request