SUCBFL210-32/F
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QMSN20J400S
Ball Bearing Units · Dimensions on request
35.9 Kg79 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QMSN20J400S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 35.9 Kg79 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 35.9 Kg79 lb |
| Catalogue Ref. | 6X8DlHehfP |
| Bearing Number | 22220 |
| C - Dynamic Load (Basic) | 97700 lb435 kN |
| C0 - Static Load | 113000 lb502 kN |
| Dimension A | 125.0 mm4.92 in |
| Dimension B | 241.0 mm9.49 in |
| Dimension C | 152.0 mm5.98 in |
| Dimension D Max | 366.0 mm14.41 in |
| Dimension D Min | 319.0 mm12.56 in |
| Dimension F | 410.00 mm16.14 in |
| Dimension H | 50.0 mm1.97 in |
| Dimension J (Bolt Size) | 24 mm0.875 in |
| Dimension K | 41.0 mm1.61 in |
| Dimension L | 126.0 mm4.96 in |
| Dimension R | 9.0 mm0.35 in |
| Dimension S | 116.00 mm4.570 in |
| Dimension Series G | 101.00 mm3.980 in |
| Dimension Series M | 75.0 mm2.95 in |
| Eng Internal Radial Clearance - Max | 0.0047 |
| Eng Internal Radial Clearance - Min | 0.0030 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QMSN20J400ST |
| Grease Lubrication - B/C/O Seal | 900 rpm |
| Grease Lubrication - Series M/N Seal | 1200 rpm |
| Grease Lubrication - T Seal | 1600 rpm |
| Housing Construction | Two-Bolt Pillow Block |
| Locking Style | Eccentric |
| Oil Lubrication - B/C/O Seal | 900 rpm |
| Oil Lubrication - Series M/N Seal | 1200 rpm |
| Oil Lubrication - T Seal | 2000 rpm |
| Pre Install Clearance Max | 0.120 mm0.0047 in |
| Pre Install Clearance Min | 0.075 mm0.0030 in |
| Shaft Size | 4 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.076 mm0.0030 in |
| UPC Code | 0883450254137 |
| Y1 - Geometry Factor | 2.85 |
| Y2 - Geometry Factor | 4.24 |
| e - Geometry Factor | 0.24 |
SNT 212 - 22212 - TSNG212
📏 Dimensions on request
EUDR-65MM
📏 Dimensions on request
QVPL16V300S
📏 Dimensions on request
UCFL206-18
📏 Dimensions on request
RTU 1
📏 Dimensions on request
LSM80BXHG
📏 Dimensions on request
SUCSP209-27/F
📏 Dimensions on request
SUCBTBYM207-22/FVSL613
📏 Dimensions on request
SNT 517 - 22314 - LO314
📏 Dimensions on request
SUCPLFL204-12/FVSL613
📏 Dimensions on request
QMPR15J075S
📏 Dimensions on request
E-P2B-TRB-2 3/16-ECC
📏 Dimensions on request
SUCBFB207-20/F
📏 Dimensions on request