UKFX17D1;H2317X
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QMSN09J111S
Ball Bearing Units · Dimensions on request
Series 10.5 KgSeries 23 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QMSN09J111S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of Series 10.5 KgSeries 23 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | Series 10.5 KgSeries 23 lb |
| Catalogue Ref. | hjOMbtaGbn |
| Bearing Number | 22209 |
| C - Dynamic Load (Basic) | 24500 lb109 kN |
| C0 - Static Load | 24200 lb108 kN |
| Dimension A | 60.0 mm2.36 in |
| Dimension B | 111.00 mm4.370 in |
| Dimension C | 67.0 mm2.64 in |
| Dimension D Max | 175.0 mm6.89 in |
| Dimension D Min | 159.0 mm6.26 in |
| Dimension F | 205.00 mmSeries 8.07 in |
| Dimension H | 35.0 mm1.38 in |
| Dimension J (Bolt Size) | Series 12 mm0.500 in |
| Dimension K | 25.0 mm0.98 in |
| Dimension L | 79.0 mm3.11 in |
| Dimension R | 6.0 mm0.24 in |
| Dimension S | 73.00 mm2.87 in |
| Dimension Series G | 62.00 mm2.440 in |
| Dimension Series M | 48 mm1.89 in |
| Eng Internal Radial Clearance - Max | 0.0022 |
| Eng Internal Radial Clearance - Min | 0.0014 |
| Engineering Group | Mounted Bearing |
| Float | 1.270 mm0.050 in |
| Full Timken Part Number | QMSN09J111ST |
| Grease Lubrication - B/C/O Seal | 1950 rpm |
| Grease Lubrication - Series M/N Seal | 2700 rpm |
| Grease Lubrication - T Seal | 4000 rpm |
| Housing Construction | Two-Bolt Pillow Block |
| Locking Style | Eccentric |
| Oil Lubrication - B/C/O Seal | 1950 rpm |
| Oil Lubrication - Series M/N Seal | 2700 rpm |
| Oil Lubrication - T Seal | 4500 rpm |
| Pre Install Clearance Max | 0.055 mm0.0022 in |
| Pre Install Clearance Min | 0.035 mm0.0014 in |
| Shaft Size | 1-11/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.038 mm0.0015 in |
| UPC Code | 0883450253840 |
| Y1 - Geometry Factor | 2.64 |
| Y2 - Geometry Factor | 3.93 |
| e - Geometry Factor | 0.26 |
QMC20J315S
📏 Dimensions on request
QMSN09J040S
📏 Dimensions on request
QVVPH28V130S
📏 Dimensions on request
UC319
📏 Dimensions on request
SAF 22511 1-7/8
📏 Dimensions on request
69790401506
📏 Dimensions on request
E-4BF-TRB-3 1/2-ECC
📏 Dimensions on request
MSE708BXHFRSS
📏 Dimensions on request
FSNT 512-610 - 21310K - LO610
📏 Dimensions on request
TAPK17K075S
📏 Dimensions on request
LSE708BRHFRSS
📏 Dimensions on request
QVF16V300S
📏 Dimensions on request
LSE103BRHFATL
📏 Dimensions on request