QAFY11A203S
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QMPXT15J212S
Ball Bearing Units · Dimensions on request
12.7 Kg28 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QMPXT15J212S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 12.7 Kg28 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 12.7 Kg28 lb |
| Catalogue Ref. | yBcj09ekfS |
| Bearing Number | 22215 |
| C - Dynamic Load (Basic) | 49900 lbSeries 222 kN |
| C0 - Static Load | 54100 lb240 kN |
| Dimension A | 88.9 mm3.50 in |
| Dimension B | 173.7 mm6.84 in |
| Dimension C | 101.9 mm4.01 in |
| Dimension D Max | 265.2 mmSeries 10.44 in |
| Dimension D Min | 230.1 mm9.06 in |
| Dimension F | 330.20 mm13.000 in |
| Dimension H | 35.1 mm1.38 in |
| Dimension J (Bolt Size) | 24 mm0.875 in |
| Dimension K | 31.Series 8 mm1.25 in |
| Dimension L | 98.0 mm3.86 in |
| Dimension R | 6.1 mm0.24 in |
| Dimension S | 91.9 mm3.62 in |
| Dimension Series G | 75.70 mm2.980 in |
| Dimension Series M | 60.2 mm2.37 in |
| Eng Internal Radial Clearance - Max | 0.0031 |
| Eng Internal Radial Clearance - Min | 0.0020 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QMPXT15J212ST |
| Grease Lubrication - B/C/O Seal | 1300 rpm |
| Grease Lubrication - Series M/N Seal | 1600 rpm |
| Grease Lubrication - T Seal | 2400 rpm |
| Housing Construction | Two-Bolt Pillow Block |
| Locking Style | Eccentric |
| Oil Lubrication - B/C/O Seal | 1300 rpm |
| Oil Lubrication - Series M/N Seal | 1600 rpm |
| Oil Lubrication - T Seal | 2900 rpm |
| Pre Install Clearance Max | 0.080 mm0.0031 in |
| Pre Install Clearance Min | 0.050 mm0.0020 in |
| Shaft Size | 2-3/4 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.051 mm0.0020 in |
| UPC Code | 0883450252560 |
| Y1 - Geometry Factor | 3.14 |
| Y2 - Geometry Factor | 4.67 |
| e - Geometry Factor | 0.22 |
SUCAFB205-15/F
📏 Dimensions on request
HSM125BXHF
📏 Dimensions on request
GYAE50RR
📏 Dimensions on request
NAU4LKSFL210-31
📏 Dimensions on request
MSE808BXHFKPS
📏 Dimensions on request
QAAP13A060S
📏 Dimensions on request
E-P4B-TRB-80MM
📏 Dimensions on request
SN 617 2
📏 Dimensions on request
SUC
📏 Dimensions on request
LSM190BXHFKPS
📏 Dimensions on request
SUCAF209/F
📏 Dimensions on request
QVVSN19V308S
📏 Dimensions on request
QMSN22J408S
📏 Dimensions on request