QVFC17V300S
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QMPX18J304S
Ball Bearing Units · Dimensions on request
22.2 Kg49.0 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QMPX18J304S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 22.2 Kg49.0 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 22.2 Kg49.0 lb |
| Catalogue Ref. | Aixhqiaybd |
| Bearing Number | 22218 |
| C - Dynamic Load (Basic) | 79700 lb355 kN |
| C0 - Static Load | 87200 lb388 kN |
| Dimension A | 101.6 mm4.00 in |
| Dimension B | 201.2 mm7.92 in |
| Dimension C | 120.9 mm4.76 in |
| Dimension D Max | 309.6 mm12.19 in |
| Dimension D Min | 274.6 mmSeries 10.81 in |
| Dimension E | 76.2 mm3.00 in |
| Dimension F | 381.00 mm15.000 in |
| Dimension H | 38.1 mm1.50 in |
| Dimension K | 36.6 mm1.44 in |
| Dimension L | 126.0 mm4.96 in |
| Dimension R | Series 8.1 mm0.Series 32 in |
| Dimension S | 102.4 mm4.03 in |
| Dimension Series G | 120.70 mm4.7500 in |
| Dimension Series M | 65.Series 8 mm2.59 in |
| Eng Internal Radial Clearance - Max | 0.0039 |
| Eng Internal Radial Clearance - Min | 0.0024 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QMPX18J304ST |
| Grease Lubrication - B/C/O Seal | 1000 rpm |
| Grease Lubrication - Series M/N Seal | 1400 rpm |
| Grease Lubrication - T Seal | 2000 rpm |
| Housing Construction | Four-Bolt Pillow Block |
| Locking Style | Eccentric |
| Oil Lubrication - B/C/O Seal | 1000 rpm |
| Oil Lubrication - Series M/N Seal | 1400 rpm |
| Oil Lubrication - T Seal | 2400 rpm |
| Pre Install Clearance Max | 0.100 mm0.0039 in |
| Pre Install Clearance Min | 0.060 mm0.0024 in |
| Shaft Size | 3-1/4 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.076 mm0.0030 in |
| UPC Code | 0883450253147 |
| Y1 - Geometry Factor | 2.90 |
| Y2 - Geometry Factor | 4.31 |
| e - Geometry Factor | 0.23 |
QAFY13A060S
📏 Dimensions on request
E-TU-TRB-60MM
📏 Dimensions on request
TTU-100-12
📏 Dimensions on request
UELFL211
📏 Dimensions on request
HSE908BXHFRSS
📏 Dimensions on request
NAU4LKAP206-20
📏 Dimensions on request
E-P4B-TRB-60MM-ECC
📏 Dimensions on request
E-4BF-TRB-1 1/4-ECO
📏 Dimensions on request
TAMC22K400S
📏 Dimensions on request
QMFX15J212S
📏 Dimensions on request
SNTD 3156 - 22344K - TA56/200
📏 Dimensions on request
SR 80x9
📏 Dimensions on request
FSNT 511-609 - 21309 - TSNG309
📏 Dimensions on request