SNT 513-611 - 22311K - LO611
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QMPL10J200S
Ball Bearing Units · Dimensions on request
5.9 KgSeries 13 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QMPL10J200S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 5.9 KgSeries 13 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 5.9 KgSeries 13 lb |
| Catalogue Ref. | AHu4NK7u7q |
| Bearing Number | 22210 |
| C - Dynamic Load (Basic) | 26300 lb117 kN |
| C0 - Static Load | 26600 lb118 kN |
| Dimension A | 57.2 mm2.25 in |
| Dimension B | 122.2 mm4.81 in |
| Dimension C | 71.4 mm2.81 in |
| Dimension D Max | 161.5 mm6.36 in |
| Dimension D Min | 150.6 mm5.93 in |
| Dimension F | 212.9 mmSeries 8.38 in |
| Dimension H | 31.Series 8 mm1.25 in |
| Dimension J (Bolt Size) | 16 mm0.625 in |
| Dimension K | 24.9 mm0.98 in |
| Dimension L | 79.0 mm3.11 in |
| Dimension R | 6.1 mm0.24 in |
| Dimension S | 72.9 mm2.87 in |
| Dimension Series G | 62.00 mm2.440 in |
| Dimension Series M | 47.5 mm1.87 in |
| Eng Internal Radial Clearance - Max | 0.0026 |
| Eng Internal Radial Clearance - Min | 0.0016 |
| Engineering Group | Mounted Bearing |
| Float | 1.270 mm0.050 in |
| Full Timken Part Number | QMPL10J200STSLD |
| Grease Lubrication - B/C/O Seal | 1800 rpm |
| Grease Lubrication - Series M/N Seal | 2400 rpm |
| Grease Lubrication - T Seal | 3550 rpm |
| Housing Construction | Two-Bolt Pillow Block |
| Locking Style | Eccentric |
| Oil Lubrication - B/C/O Seal | 1800 rpm |
| Oil Lubrication - Series M/N Seal | 2400 rpm |
| Oil Lubrication - T Seal | 4200 rpm |
| Pre Install Clearance Max | 0.065 mm0.0026 in |
| Pre Install Clearance Min | 0.040 mm0.0016 in |
| Shaft Size | 2 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.038 mm0.0015 in |
| UPC Code | 0883450500449 |
| Y1 - Geometry Factor | 2.84 |
| Y2 - Geometry Factor | 4.23 |
| e - Geometry Factor | 0.24 |
MSM130BRHF
📏 Dimensions on request
TU-5x18
📏 Dimensions on request
QVC11V115S
📏 Dimensions on request
FSNT 515-612 - 22215K - TA515
📏 Dimensions on request
SNTD 3080L - 23080K - TA80
📏 Dimensions on request
V180C90-90 1
📏 Dimensions on request
QVVFC17V070S
📏 Dimensions on request
NAU4LKBFL210-32
📏 Dimensions on request
E-TTU-TRB-70MM-ECC
📏 Dimensions on request
FSNT 512-610 - 22212K - VR512
📏 Dimensions on request
QVFL12V203S
📏 Dimensions on request
UELT214-44
📏 Dimensions on request