SAAK207
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QMFY13J207S
Ball Bearing Units · Dimensions on request
8.6 KgSeries 19 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QMFY13J207S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 8.6 KgSeries 19 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 8.6 KgSeries 19 lb |
| Catalogue Ref. | DlDgXJ766X |
| Bearing Number | 22213 |
| C - Dynamic Load (Basic) | 46400 lb206 kN |
| C0 - Static Load | 48600 lb216 kN |
| Dimension BC | 171.5 mm6.75 in |
| Dimension C | 91.90 mm3.620 in |
| Dimension D | 146.1 mm5.75 in |
| Dimension E | 121.2 mm4.77 in |
| Dimension F | 206.5 mm8.13 in |
| Dimension H | 23.9 mm0.94 in |
| Dimension J (Bolt Size) | 16 mm0.625 in |
| Dimension K | 31.5 mm1.24 in |
| Dimension L Exp | 90.4 mm3.56 in |
| Dimension L Fix | 88.1 mm3.47 in |
| Dimension N | 72.40 mm2.850 in |
| Dimension R | 2.3 mm0.09 in |
| Dimension S | 85.6 mm3.37 in |
| Dimension Series M | 54.1 mm2.13 in |
| Eng Internal Radial Clearance - Max | 0.0026 |
| Eng Internal Radial Clearance - Min | 0.0016 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QMFY13J207ST |
| Grease Lubrication - B/C/O Seal | 1500 rpm |
| Grease Lubrication - Series M/N Seal | 1800 rpm |
| Grease Lubrication - T Seal | 2800 rpm |
| Housing Construction | Round Flange |
| Locking Style | Eccentric |
| Oil Lubrication - B/C/O Seal | 1500 rpm |
| Oil Lubrication - Series M/N Seal | 1800 rpm |
| Oil Lubrication - T Seal | 3200 rpm |
| Pre Install Clearance Max | 0.065 mm0.0026 in |
| Pre Install Clearance Min | 0.040 mm0.0016 in |
| Shaft Size | 2-7/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.038 mm0.0015 in |
| UPC Code | 0883450256537 |
| Y1 - Geometry Factor | 2.79 |
| Y2 - Geometry Factor | 4.15 |
| e - Geometry Factor | 0.24 |
HCAK211-34
📏 Dimensions on request
SAAK204-12
📏 Dimensions on request
SAAK206-18
📏 Dimensions on request
SAAK205-16
📏 Dimensions on request
HCAK212-36
📏 Dimensions on request
SAAK206-17
📏 Dimensions on request
SAAK206-19
📏 Dimensions on request
SAAK205-15
📏 Dimensions on request
HCAK212-38
📏 Dimensions on request
SAAK204
📏 Dimensions on request
SAAK206-20
📏 Dimensions on request
SAAK206
📏 Dimensions on request
SAAK205-14
📏 Dimensions on request