LSE107BXHGKPS
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QATU11A204S
Ball Bearing Units · Dimensions on request
9.5 Kg21.0 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QATU11A204S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 9.5 Kg21.0 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 9.5 Kg21.0 lb |
| Catalogue Ref. | P2cv1y4N45 |
| Bearing Number | 22211 |
| C - Dynamic Load (Basic) | 31400 lb140 kN |
| C0 - Static Load | 31900 lb142 kN |
| Dimension A | 60.5 mm2.38 in |
| Dimension C | 19.1 mm0.75 in |
| Dimension D | 133.4 mm5.25 in |
| Dimension E | 114.3 mm4.50 in |
| Dimension F | 28.7 mm1.13 in |
| Dimension G | 30.2 mm1.19 in |
| Dimension J | 88.9 mm3.50 in |
| Dimension KA | 28.7 mm1.13 in |
| Dimension L | 167.9 mm6.61 in |
| Dimension M | 50.8 mm2 in |
| Dimension N | 81.8 mm3.22 in |
| Dimension P | 95.3 mm3.75 in |
| Dimension S | 20.60 mm0.810 in |
| Eng Internal Radial Clearance - Max | 0.0026 |
| Eng Internal Radial Clearance - Min | 0.0016 |
| Engineering Group | Mounted Bearing |
| Float | 1.270 mm0.050 in |
| Full Timken Part Number | QATU11A204ST |
| Grease Lubrication - B/C/O Seal | 1600 rpm |
| Grease Lubrication - M/N Seal | 2200 rpm |
| Grease Lubrication - T Seal | 3200 rpm |
| Housing Construction | Take-Up |
| Locking Style | Single Concentric |
| Oil Lubrication - B/C/O Seal | 1600 rpm |
| Oil Lubrication - M/N Seal | 2200 rpm |
| Oil Lubrication - T Seal | 3800 rpm |
| Pre Install Clearance Max | 0.065 mm0.0026 in |
| Pre Install Clearance Min | 0.040 mm0.0016 in |
| Shaft Size | 2-1/4 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.038 mm0.0015 in |
| UPC Code | 0883450272537 |
| Y1 - Geometry Factor | 2.95 |
| Y2 - Geometry Factor | 4.40 |
| e - Geometry Factor | 0.23 |
UKP216 - HE2316
📏 Dimensions on request
V090C60-0 1
📏 Dimensions on request
1204KRRB
📏 Dimensions on request
SUCPLF210/FVSL613
📏 Dimensions on request
QVFL16V075S
📏 Dimensions on request
LSE111BXHFKPS
📏 Dimensions on request
GYA015RRB
📏 Dimensions on request
SUCATBY204/FVSL613
📏 Dimensions on request
UC317
📏 Dimensions on request
QVFK22V311S
📏 Dimensions on request
QVP22V315S
📏 Dimensions on request
V270C135-135 1
📏 Dimensions on request
UCF328
📏 Dimensions on request