QMFY15J075S
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QAP10A200S
Ball Bearing Units · Dimensions on request
5.9 KgSeries 13 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QAP10A200S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 5.9 KgSeries 13 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 5.9 KgSeries 13 lb |
| Catalogue Ref. | LR6AtA3c28 |
| Bearing Number | 22210 |
| C - Dynamic Load (Basic) | 26300 lb117 kN |
| C0 - Static Load | 26600 lb118 kN |
| Dimension A | 57.2 mm2.25 in |
| Dimension B | 122.2 mm4.81 in |
| Dimension C | 73.2 mm2.88 in |
| Dimension D Max | 181.1 mm7.13 in |
| Dimension D Min | 152.4 mm6.00 in |
| Dimension F | 225.6 mmSeries 8.88 in |
| Dimension H | 31.Series 8 mm1.25 in |
| Dimension J (Bolt Size) | 16 mm0.625 in |
| Dimension KA | 25.4 mm1 in |
| Dimension L | 79.0 mm3.11 in |
| Dimension SA | 72.9 mm2.87 in |
| Dimension Series G | 62.00 mm2.440 in |
| Dimension Series M | 47.5 mm1.87 in |
| Dimension Series RA | 6.1 mm0.24 in |
| Eng Internal Radial Clearance - Max | 0.0026 |
| Eng Internal Radial Clearance - Min | 0.0016 |
| Engineering Group | Mounted Bearing |
| Float | 1.270 mm0.050 in |
| Full Timken Part Number | QAP10A200STNG |
| Grease Lubrication - B/C/O Seal | 1800 rpm |
| Grease Lubrication - Series M/N Seal | 2400 rpm |
| Grease Lubrication - T Seal | 3550 rpm |
| Housing Construction | Two-Bolt Pillow Block |
| Locking Style | Single Concentric |
| Oil Lubrication - B/C/O Seal | 1800 rpm |
| Oil Lubrication - Series M/N Seal | 2400 rpm |
| Oil Lubrication - T Seal | 4200 rpm |
| Pre Install Clearance Max | 0.065 mm0.0026 in |
| Pre Install Clearance Min | 0.040 mm0.0016 in |
| Shaft Size | 2 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.038 mm0.0015 in |
| UPC Code | 0883450961370 |
| Y1 - Geometry Factor | 2.84 |
| Y2 - Geometry Factor | 4.23 |
| e - Geometry Factor | 0.24 |
QMFY08J107S
📏 Dimensions on request
SCJT 20
📏 Dimensions on request
QVVFX19V303S
📏 Dimensions on request
QVVPH22V311S
📏 Dimensions on request
QVP14V060S
📏 Dimensions on request
HSM250BRHFHTPS
📏 Dimensions on request
QMFL18J080S
📏 Dimensions on request
SUCAP209-26/F
📏 Dimensions on request
UC211-35
📏 Dimensions on request
CM-UKFC208D1;H2308X
📏 Dimensions on request
QAACW10A115S
📏 Dimensions on request
HSE500BXHFATL
📏 Dimensions on request