E-P4B-TRB-4 7/16-ECC
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QAFL10A200S
Ball Bearing Units · Dimensions on request
5.0 Kg11.0 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QAFL10A200S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 5.0 Kg11.0 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 5.0 Kg11.0 lb |
| Catalogue Ref. | zxzSmlcKdV |
| Bearing Number | 22210 |
| C - Dynamic Load (Basic) | 26300 lb117 kN |
| C0 - Static Load | 26600 lb118 kN |
| Dimension BC | 146.1 mm5.75 in |
| Dimension C | 73.2 mm2.88 in |
| Dimension D | 120.70 mm4.750 in |
| Dimension E | 103.4 mm4.07 in |
| Dimension F | 131.8 mm5.19 in |
| Dimension H | 23.1 mm0.91 in |
| Dimension J (Bolt Size) | 12 mm0.5 in |
| Dimension KA | 24.9 mm0.98 in |
| Dimension L Exp | 82.8 mm3.26 in |
| Dimension L Fix | 80.8 mm3.18 in |
| Dimension M | 48 mm1.89 in |
| Dimension N | 62.50 mm2.460 in |
| Dimension RA | 7.9 mm0.31 in |
| Dimension SA | 72.9 mm2.87 in |
| Eng Internal Radial Clearance - Max | 0.0026 |
| Eng Internal Radial Clearance - Min | 0.0016 |
| Engineering Group | Mounted Bearing |
| Float | 1.270 mm0.050 in |
| Full Timken Part Number | QAFL10Series A200ST |
| Grease Lubrication - B/C/O Seal | 1800 rpm |
| Grease Lubrication - M/N Seal | 2400 rpm |
| Grease Lubrication - T Seal | 3550 rpm |
| Housing Construction | Four-Bolt Square Flange |
| Locking Style | Single Concentric |
| Oil Lubrication - B/C/O Seal | 1800 rpm |
| Oil Lubrication - M/N Seal | 2400 rpm |
| Oil Lubrication - T Seal | 4200 rpm |
| Pre Install Clearance Max | 0.065 mm0.0026 in |
| Pre Install Clearance Min | 0.040 mm0.0016 in |
| Shaft Size | 2 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.038 mm0.0015 in |
| UPC Code | 0883450952835 |
| Y1 - Geometry Factor | 2.71 |
| Y2 - Geometry Factor | 4.04 |
| e - Geometry Factor | 0.25 |
TAS 1
📏 Dimensions on request
SN 220C
📏 Dimensions on request
QAAP18A090S
📏 Dimensions on request