SDAF 22624 4-1/8
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QAASN13A207S
Ball Bearing Units · Dimensions on request
15.90 Kg35 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QAASN13A207S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 15.90 Kg35 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 15.90 Kg35 lb |
| Catalogue Ref. | tle20vdieB |
| Bearing Number | 22213 |
| C - Dynamic Load (Basic) | 4Series 6400 lb206 kN |
| C0 - Static Load | 48600 lb216 kN |
| Dimension A | 80.0 mm3.15 in |
| Dimension B | 157.00 mm6.18 in |
| Dimension C | 96.8 mm3.81 in |
| Dimension D Max | 235.0 mm9.25 in |
| Dimension D Min | 196.0 mm7.72 in |
| Dimension F | 275.00 mm10.83 in |
| Dimension G | 74.00 mm2.910 in |
| Dimension H | 35.0 mm1.38 in |
| Dimension J (Bolt Size) | 16 mm0.625 in |
| Dimension L | 92.0 mm3.62 in |
| Dimension M | 54.6 mm2.15 in |
| Dimension RAA | 18 mm0.71 in |
| Dimension SAA | 110.0 mm4.33 in |
| Eng Internal Radial Clearance - Max | 0.0026 |
| Eng Internal Radial Clearance - Min | 0.0016 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QAASN13A207ST |
| Grease Lubrication - B/C/O Seal | 1500 rpm |
| Grease Lubrication - M/N Seal | 1800 rpm |
| Grease Lubrication - T Seal | 2800 rpm |
| Housing Construction | Two-Bolt Pillow Block |
| Locking Style | Double Concentric |
| Oil Lubrication - B/C/O Seal | 1500 rpm |
| Oil Lubrication - M/N Seal | 1800 rpm |
| Oil Lubrication - T Seal | 3200 rpm |
| Pre Install Clearance Max | 0.065 mm0.0026 in |
| Pre Install Clearance Min | 0.040 mm0.0016 in |
| Shaft Size | 2-7/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.038 mm0.0015 in |
| UPC Code | 0883450349468 |
| Y1 - Geometry Factor | 2.79 |
| Y2 - Geometry Factor | 4.15 |
| e - Geometry Factor | 0.24 |
SNT 522-619 - 22319 - LO319
📏 Dimensions on request
SNT 513-611 - 22311 - TSNG311
📏 Dimensions on request
QVVPA20V307S
📏 Dimensions on request
QASN15A075S
📏 Dimensions on request
QAP13A060S
📏 Dimensions on request
NAU4LKSP208-25
📏 Dimensions on request
SUCBFL208-24/F
📏 Dimensions on request
FSNT 209 - 22209 - LO209
📏 Dimensions on request
UCT315-48
📏 Dimensions on request
SUCAFB210-30/FVSL613
📏 Dimensions on request
QVVPN20V090S
📏 Dimensions on request
QVVFC22V400S
📏 Dimensions on request
UC305
📏 Dimensions on request