FSNT 520-617 - 21317K - TA617
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QAAPL18A304S
Ball Bearing Units · Dimensions on request
20.40 Kg45 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QAAPL18A304S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 20.40 Kg45 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 20.40 Kg45 lb |
| Catalogue Ref. | GiE7z54l3x |
| Bearing Number | 22218 |
| C - Dynamic Load (Basic) | 79700 lb355 kN |
| C0 - Static Load | 87200 lb388 kN |
| Dimension A | 95.3 mm3.75 in |
| Dimension B | 195.3 mm7.69 in |
| Dimension C | 130.3 mm5.13 in |
| Dimension D Max | 273.1 mm10.75 in |
| Dimension D Min | 235.0 mm9.25 in |
| Dimension F | 330.20 mm13.000 in |
| Dimension G | 86.60 mm3.410 in |
| Dimension H | 47.8 mm1.88 in |
| Dimension J (Bolt Size) | 24 mm0.875 in |
| Dimension L | 109.2 mm4.3 in |
| Dimension M | 65.8 mm2.59 in |
| Dimension RAA | 22.6 mm0.89 in |
| Dimension SAA | 131.6 mm5.18 in |
| Eng Internal Radial Clearance - Max | 0.0039 |
| Eng Internal Radial Clearance - Min | 0.0024 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QAAPL18A304ST |
| Grease Lubrication - B/C/O Seal | 1000 rpm |
| Grease Lubrication - M/N Seal | 1400 rpm |
| Grease Lubrication - T Seal | 2000 rpm |
| Housing Construction | Two-Bolt Pillow Block |
| Locking Style | Double Concentric |
| Oil Lubrication - B/C/O Seal | 1000 rpm |
| Oil Lubrication - M/N Seal | 1400 rpm |
| Oil Lubrication - T Seal | 2400 rpm |
| Pre Install Clearance Max | 0.100 mm0.0039 in |
| Pre Install Clearance Min | 0.060 mm0.0024 in |
| Shaft Size | 3-1/4 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.076 mm0.0030 in |
| UPC Code | 0883450321525 |
| Y1 - Geometry Factor | 2.90 |
| Y2 - Geometry Factor | 4.31 |
| e - Geometry Factor | 0.23 |
FSNT 518-615 - 22315 - TA315
📏 Dimensions on request
SUCBT206-18/FVSL613
📏 Dimensions on request
QVVPF16V212S
📏 Dimensions on request
E-4BF-TRB-65MM
📏 Dimensions on request
YCJM2
📏 Dimensions on request
69790413643
📏 Dimensions on request
UKFC210 - H2310
📏 Dimensions on request
LSE207BXHFRSS
📏 Dimensions on request
CM-UKF206D1;H2306X
📏 Dimensions on request
UELFC212-36
📏 Dimensions on request
QAF11A204S
📏 Dimensions on request
UCP218
📏 Dimensions on request
QAAPXT13A060S
📏 Dimensions on request