HSM500BRHS
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN LSE800BRHSAFQ
Custom & Special Bearings · Dimensions on request
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN LSE800BRHSAFQ is a Custom & Special Bearings, available in the dimensions listed in the specification table below. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Catalogue Ref. | fRVkDn2d6C |
| Bearing Number | LSE800BR |
| Bearing Type | Split Cylindrical Retained Type |
| Bearing UPC | 013992027580 |
| Bolt Size | 4 x 1-1/4" |
| Cor - Static Load Rating | 222676 lbf989.7 kN |
| Cr - Dynamic Load Rating | 136576 lbf607 kN |
| Dimension H | 8-1/4 in |
| Dimension H2 | 17.7 in |
| Dimension J1 | 25 in |
| Dimension J2 | 22-1/2 in |
| Dimension K | 5 in |
| Dimension L | 29-3/8 in |
| Dimension M | 8 in |
| Housing Width | 172 mm6.8 in |
| Maximum Speed | 1070 rpm |
| Note | This product line was formerly known as Revolvo |
| Pillow/Plummer Block Style | Split Cylindrical Housed Unit - SAFQ |
| Seal Type | Felt Type |
| Series Type | Light Series |
| Shaft Size | 8.000 in |
| Support Type | Four-Bolt Plummer Block |
LSE508BXHSAFQKPS
📏 Dimensions on request
10X26X7-RLS35-S
📏 Dimensions on request
WZ2-1/2
📏 Dimensions on request
LSE412BRHFKPS
📏 Dimensions on request
594A - 592D
📏 Dimensions on request
68514458563
📏 Dimensions on request
68514444385
📏 Dimensions on request
1021V
📏 Dimensions on request
LSE303BXHSHTPS
📏 Dimensions on request
68514457606
📏 Dimensions on request
68514439189
📏 Dimensions on request