SAF 22534 6
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN LSE715BXHF
Ball Bearing Units · Dimensions on request
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN LSE715BXHF is a Ball Bearing Units, available in the dimensions listed in the specification table below. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Catalogue Ref. | PJ3bd34H3Y |
| Bearing - Housing - Seal | LSE715BXH |
| Bearing Number | LSE715BX |
| Bearing Type | Split Cylindrical Expansion Type |
| Bearing UPC | 013992027573 |
| Bolt Size | 4 x M24 |
| Cor - Static Load Rating | 222561 lbf990 kN |
| Cr - Dynamic Load Rating | 138033 lbf614 kN |
| Dimension H | 108 mm4.3 in |
| Dimension L | 194 mm7.7 in |
| Dimension N | 400.05 mm15.750 in |
| Dimension P | 32 mm1.3 in |
| Dimension R | 474 mm18.7 in |
| Dimension T | 534 mm21.0 in |
| Dimension V | 3 mm0.1 in |
| Maximum Speed | 1070 rpm |
| Note | This product line was formerly known as Revolvo |
| Seal Type | Felt Seal |
| Series Type | Light Series |
| Shaft Size | 7-15/16 in |
| Support Type | Round Flange |
QVVPH20V307S
📏 Dimensions on request
EOP-U206-19
📏 Dimensions on request
QVFC22V100S
📏 Dimensions on request
UCT306
📏 Dimensions on request
QVVPK22V400S
📏 Dimensions on request
SAF 22515 2-1/2
📏 Dimensions on request
QVFL14V065S
📏 Dimensions on request
LSE607BRHFKPS
📏 Dimensions on request
NAU4LKSTB209-28
📏 Dimensions on request
LSM190BXHF
📏 Dimensions on request
LSE212BXHFRSS
📏 Dimensions on request
LSE715BRHFKPS
📏 Dimensions on request
SN 305C 2
📏 Dimensions on request