LSM200BXHSATL
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN LSE507BXHSAFQKPS
Custom & Special Bearings · Dimensions on request
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN LSE507BXHSAFQKPS is a Custom & Special Bearings, available in the dimensions listed in the specification table below. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Catalogue Ref. | jgAcih8u8F |
| Bearing Number | LSE507BX |
| Bearing Type | Split Cylindrical Expansion Type |
| Bearing UPC | 013992027245 |
| Bolt Size | 4 x 1" |
| Cor - Static Load Rating | 131675 lbf585.2 kN |
| Cr - Dynamic Load Rating | 95055 lbf422.5 kN |
| Dimension H | 6-5/16 in |
| Dimension H2 | 14.2 in |
| Dimension J1 | 18-1/2 in |
| Dimension J2 | 16-3/4 in |
| Dimension K | 3-3/4 in |
| Dimension L | 21-3/4 in |
| Dimension M | 6-1/4 in |
| Housing Width | 166 mm6.5 in |
| Maximum Speed | 1570 rpm |
| Note | This product line was formerly known as “Revolvo” |
| Pillow/Plummer Block Style | Split Cylindrical Housed Unit - SAFQ |
| Seal Type | Kevlar Packing Seal |
| Series Type | Light Series |
| Shaft Size | 5-7/16 in |
| Support Type | Four-Bolt Plummer Block |
HSM320BRHSATL
📏 Dimensions on request
68514439220
📏 Dimensions on request
LSM530BRHSKPS
📏 Dimensions on request
69790498165
📏 Dimensions on request
GN112KRRB
📏 Dimensions on request
MSE814BXHFHTPS
📏 Dimensions on request
MSE411BXHSKPS
📏 Dimensions on request
68514458604
📏 Dimensions on request
68514425767
📏 Dimensions on request
68514410491
📏 Dimensions on request