392 - 394A
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN LSE507BRHSNA
Custom & Special Bearings · Dimensions on request
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN LSE507BRHSNA is a Custom & Special Bearings, available in the dimensions listed in the specification table below. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Catalogue Ref. | zP2mA18S99 |
| Bearing Number | LSE507BR |
| Bearing Type | Split Cylindrical Retained Type |
| Bearing UPC | 013992027221 |
| Bolt Size | 2 x M30 |
| Ca - Axial Load Rating | 5799.99 lbf25.80 kN |
| Cor - Static Load Rating | 131513 lbf585 kN |
| Cr - Dynamic Load Rating | 94869 lbf422 kN |
| Dimension H | 170 mm |
| Dimension H2 | 379 mm |
| Dimension J | 470 mm |
| Dimension L | 550 mm |
| Dimension M | 160 mm |
| Housing Width | 166 mm6.5 in |
| Maximum Speed | 1570 rpm |
| Note | This product line was formerly known as Revolvo |
| Pillow/Plummer Block Style | Split Cylindrical Housed Unit - Angled |
| Seal Type | Felt Type |
| Series Type | Light Series |
| Shaft Size | 5-7/16 in |
| Support Type | Two-Bolt Plummer Block |
036BULK
📏 Dimensions on request
LSM80BRHSNAHTPS
📏 Dimensions on request
MSE507BRHSRSS
📏 Dimensions on request
RRS Type Hub - Special Approved Application Only
📏 Dimensions on request
84527105231
📏 Dimensions on request
MSM50BRHSKPS
📏 Dimensions on request
69790499087
📏 Dimensions on request
6216-2RS-C3
📏 Dimensions on request
HSE512BRHSATL
📏 Dimensions on request