ZRB10X16
📏 Dimensions on request
Product Photo
TIMKENCylindrical Roller Bearings
TIMKEN LSE415BRHSNQ
Cylindrical Roller Bearings · Dimensions on request
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN LSE415BRHSNQ is a Cylindrical Roller Bearings, available in the dimensions listed in the specification table below. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Cylindrical Roller Bearings |
| Type | Cylindrical Roller Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Catalogue Ref. | 3TnWUdcfdj |
| Bearing Number | LSE415BR |
| Bearing Type | Split Cylindrical Retained Type |
| Bearing UPC | 013992027030 |
| Bolt Size | 2 x M30 |
| Ca - Axial Load Rating | 4990.69 lbf22.20 kN |
| Cor - Static Load Rating | 111505 lbf496 kN |
| Cr - Dynamic Load Rating | 81606 lbf363 kN |
| Dimension H | 150 mm |
| Dimension H2 | 354 mm |
| Dimension J | 420 mm |
| Dimension L | 500 mm |
| Dimension M | 150 mm |
| Housing Width | 154 mm6.1 in |
| Maximum Speed | 1740 rpm |
| Note | This product line was formerly known as Revolvo |
| Pillow/Plummer Block Style | Split Cylindrical Housed Unit - Angled |
| Seal Type | Felt Type |
| Series Type | Light Series |
| Shaft Size | 4-15/16 in |
| Support Type | Two-Bolt Plummer Block |
02473 - 02420-B
📏 Dimensions on request
NJ232EMA
📏 Dimensions on request
LSE315BXHSN
📏 Dimensions on request
LSE308BRHSNBKPS
📏 Dimensions on request
LSE300BRHSNQATL
📏 Dimensions on request
LM121948D - LM121911
📏 Dimensions on request
500RX2345A
📏 Dimensions on request