HYDNUT240-INCH.SEAL
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN LSE315BXHSAFQ
Custom & Special Bearings · Dimensions on request
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN LSE315BXHSAFQ is a Custom & Special Bearings, available in the dimensions listed in the specification table below. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Catalogue Ref. | dRzqCL7j7c |
| Bearing Number | LSE315BX |
| Bearing Type | Split Cylindrical Expansion Type |
| Bearing UPC | 013992026552 |
| Bolt Size | 4 x 3/4" |
| Cor - Static Load Rating | 82399 lbf366.2 kN |
| Cr - Dynamic Load Rating | 64872 lbf288.3 kN |
| Dimension H | 4-15/16 in |
| Dimension H2 | 10.45 in |
| Dimension J1 | 14-1/2 in |
| Dimension J2 | 12-19/32 in |
| Dimension K | 2-3/4 in |
| Dimension L | 16-1/2 in |
| Dimension M | 4-3/4 in |
| Housing Width | 132 mm5.2 in |
| Maximum Speed | 2340 rpm |
| Note | This product line was formerly known as “Revolvo” |
| Pillow/Plummer Block Style | Split Cylindrical Housed Unit - SAFQ |
| Seal Type | Felt Type |
| Series Type | Light Series |
| Shaft Size | 3-15/16 in |
| Support Type | Four-Bolt Plummer Block |
MSE208BXHSRSS
📏 Dimensions on request
MSE515BRHS
📏 Dimensions on request
LSE300BXHSHTPS
📏 Dimensions on request
68514421106
📏 Dimensions on request
LSE308BXHSAFQATL
📏 Dimensions on request
68514476274
📏 Dimensions on request
HSM320BXHSHTPS
📏 Dimensions on request
69790498306
📏 Dimensions on request
69790498058
📏 Dimensions on request
68514410802
📏 Dimensions on request